Front Camera

[okbob]

Sounds great. Looking forward to seeing it. I have your recommended cable in my Amazon cart ready to order, although I may go out and measure to see if I need to get the 6 foot long one. Still trying to decide if I need to move the camera to in front of the winch (similar to JCR's setup) or how it sounds like yours is setup (which I why I am looking forward to seeing your pics).

I pulled the cable down so you can see it but it's usually tied up high in there.

Sponsored

 

[Panzer948]

I pulled the cable down so you can see it but it's usually tied up high in there.

Ok, perfect. Now I see how easy it was for you. You were able to use the molle like holes to bolt the camera mount into. No wonder you went below the fairlead. Does your 360 view stitch together fine or atleast close?

I have a different setup to deal with so still trying to figure out how to approach it. There is the space below my fairlead and the light opening that I could mount it too (the fairlead sticks out about as thick as the camera housing (hard to tell in pics). Or I could somehow mount it just below the push bar or on the push bar (both above the fairlead). Either way, I am sure I can figure this out myself now that I have your cable part handy! Maybe I will do a DIY since I am not the only one with this ADD Bumper combo.

I guess you just tied off the water line so that it doesn't fire when cleaning windshield (or maybe it is still going in there, hard to tell).

Thanks again for taking the time to take the pics!

 

[okbob]

Ok, perfect. Now I see how easy it was for you. You were able to use the molle like holes to bolt the camera mount into. No wonder you went below the fairlead. Does your 360 view stitch together fine or atleast close?

I have a different setup to deal with so still trying to figure out how to approach it. There is the space below my fairlead and the light opening that I could mount it too (the fairlead sticks out about as thick as the camera housing (hard to tell in pics). Or I could somehow mount it just below the push bar or on the push bar (both above the fairlead). Either way, I am sure I can figure this out myself now that I have your cable part handy! Maybe I will do a DIY since I am not the only one with this ADD Bumper combo.

I guess you just tied off the water line so that it doesn't fire when cleaning windshield (or maybe it is still going in there, hard to tell).

Thanks again for taking the time to take the pics!

The washer hose I just screwed a bolt into the end and plugged it. There's very little distortion with the cam being lower, you have to really look for it to notice it on the screen

 

[BroncoPls!]

JCROFFROAD camera mount combined with plate mount works great

 

[br.jonathan]

Bronco camera relocation project
Mountain2metal camera mount modified and installed on top of zroadz prerunnerbar (I did not wanted camera on front of the bronco all exposed)

Built
Badland sasquatch wirh mod bumper
RC high winch mount with warn evo10
Zroadz prerunner bar
modified mountain2metal cameral mount

 

[Jd1539]

Doesn't the Rough Country hidden winch alleviate any issues with cameras and cruise control?

 

[Treich]

https://a.co/d/iuaTBpD

$6.49 for the cable on Amazon. And I moved my camera down to the "grill" area of the RC High Mount. Simple and free lol, had the two bolts, washers and nuts on hand.

Did you choose that lower location due to the 3ft cable extension length or wad there adequate slack to mount to a higher bull bar?

 

[vzqhsg]

Doesn't the Rough Country hidden winch alleviate any issues with cameras and cruise control?

Thinking the same thing. On the new Jeeps they have an integrated factory bumper/winch that is really nice. This is one of the things that Ford has to rethink. My 2¢.

 

[Panzer948]

Update from my post above. Several months ago I moved mine to the top of the bumper....

 

[okbob]

Did you choose that lower location due to the 3ft cable extension length or wad there adequate slack to mount to a higher bull bar?

There was plenty of cable, the original location would have been completely blocked out by the winch so I went under it.

 

[B Miller]

Here's what I did. I have Lux with all the sensors and camera. Hope it helps!

Sponsored