Front side pocket screws and threads. Anyone know what this is called?

[thenotoriousrob]

I bought some plastic side door pockets on Amazon that I'm now returning (way too bulky) and I'm looking for something else. The cords on the OEM pockets broke, so they're useless.
While un-ratcheting the screws the little black piece that holds the screw in place came out with the screw. This happened on the other side as well, and when I went to put it back in, it fell to the bottom of the door. Now this one came out also, so I figured I'd see if anyone knows what it's called so I can replace the other one.
Any specifics so I can order one (hopefully) will help. Thanks.

Sponsored

 

[amjump]

I had a similar issue when upgrading door pockets. I reached out to IAG and they recommended I replace the internal snap-in nut with the following part from McMaster-Carr:

90680A192 Snap-in Nut, Zinc-Plated Steel, M6 Size, 1.626 mm-2.667 mm Panel Thickness

I ordered the part but ultimately deemed removing the door trim panel outside my level of comfort with how easy the plastic gets scratched.

Hope that helps!

 

[thenotoriousrob]

Ok thanks. At least I know the specs now.

 

[DRC]

Has anyone actually installed these 90680A192 Snap-in Nuts in the door panels yet? Do you have any pictures of the install?

 

[Breptar]

Hello - was that part ever replaced? I just broke mine hand tightening it. I called ford and the part number is W790577-S900 is not available. I am
Wondering is the McMaster-Carr part number able works?

https://www.mcmaster.com/product/90680A192

Sponsored