Grille LED letters and smoked taillight installed

[Roll Tide!]

Looks nice. Need this to finish off the back. Easy to install just heat up the emblem and pop it off.

https://www.ebay.com/itm/313573543438?fits=Make:Ford&hash=item4902708e0e:g:64QAAOSws7JheGVb&amdata=enc:AQAIAAAA8K6viE7tw2GdZOFg/6yQxtOmQZl+b5/5+3+UKIjnmcZIFEqHv2SxzUhyu3ihkLTYlgS/Cq3mA7cIseQT/xRKHzuwqwvqTC1T9ky8u8leRxgsQc8dSUaRKoTN3z/5lJeYVhgHOUr1Geu236VMXyfsQ1Z3U/eI0fTP7+6ywXr0cyaf/hF+3coNHi1zYZI1dW4TJS7jLNUgPHAeuIJ9McbGTnMQzyD7aEjx9k/y7wlnXC7BxV7gnoWB/kZXsoUVspa08HLd27gjPnW8DpjsElt1pH4ipanlzYJ7RyxFG+kYDEB46DC1lh0NXheYO+Q612dJ4g==|tkp:Bk9SR6TY05CvYg

$161
wow! I wonder what the profit margin is on that?

Sponsored

 

[HCGxKaLiBeR]

$161
wow! I wonder what the profit margin is on that?

hahaha yeah thats why I have not got it replaced it yet. Too damn expensive for what it is.
I've been looking for overlay decals. Most of them go for 10 - 30 a pop

 

[Joemama]

Got the LED letters and taillight from Amazon. Both are fantastic.

Letters brightness is just about right during day and night.
Startup dance sequence is a bit cheesy and gimmicky but it only last for like 5 seconds so it is not terrible haha.

Smoked taillight looks good over Oxford white color. Though kind of wished it is not as dark.
I prefer the clear taillight look, though can't find it anywhere yet.
They got their own gimmicky startup dance sequence (Luckily it can be turned off from the switch inside..)
Turn signals are sequential. I really like this part.

Next upgrade will be deleing the 3rd brake light in exchange of spare tire brake light inside the wheel.
After that, it will have that clean, stealth, black/white contrast look.

Got the LED letters and taillight from Amazon. Both are fantastic.

Letters brightness is just about right during day and night.
Startup dance sequence is a bit cheesy and gimmicky but it only last for like 5 seconds so it is not terrible haha.

Smoked taillight looks good over Oxford white color. Though kind of wished it is not as dark.
I prefer the clear taillight look, though can't find it anywhere yet.
They got their own gimmicky startup dance sequence (Luckily it can be turned off from the switch inside..)
Turn signals are sequential. I really like this part.

Next upgrade will be deleing the 3rd brake light in exchange of spare tire brake light inside the wheel.
After that, it will have that clean, stealth, black/white contrast look.

What size tires you running? looking to get some similar

 

[rblock50]

I have something like this in mind. When it is not braking, it stays stealthy.
Saw some jeep guys doing it. Looks pretty good as long as not over done.

Connector uses the 3rd brake light plug.
I won't be putting my 3rd brake light back on, so I will tape the splitter shut.

Yup, I've seen quite a few guys on here do that too. Removing the current 3rd brake light is pretty easy, there are a lot of videos out there too if you get stuck. It's a pretty quick job. Good luck!

 

[HCGxKaLiBeR]

What size tires you running? looking to get some similar

its the stock 35 that came with Sasquash...

 

[Ninjak]

Haha yes detail matters. I have not decided what to replace it yet.
There are black Ford, horse, flag, sas emblems to pick from.

Came out great! I have an Oxford White as well. I was thinking of going with a Whiten Black Ford logo, I believe I saw one on Esty, or whatever that site is called.

 

[Morley]

Do you have a link to the letters?

 

[HCGxKaLiBeR]

Do you have a link to the letters?

https://a.co/d/1G3dzt2

FYI. The OEM letters from Ford are hot glued on the grill. Drill is needed.
You are not drilling new holes or damaging the original letters if you are careful.
So yeah... Taking them off can be a bit tedious.

 

[Deleted member 49144]

Is it just me or is EVERYTHING expensive as hell for bronco aftermarket. Me thinks they’re doing it on purpose. Lol

 

[STONEWALKER]

Got the LED letters and taillight from Amazon. Both are fantastic.

Letters brightness is just about right during day and night.
Startup dance sequence is a bit cheesy and gimmicky but it only last for like 5 seconds so it is not terrible haha.

Smoked taillight looks good over Oxford white color. Though kind of wished it is not as dark.
I prefer the clear taillight look, though can't find it anywhere yet.
They got their own gimmicky startup dance sequence (Luckily it can be turned off from the switch inside..)
Turn signals are sequential. I really like this part.

Next upgrade will be deleing the 3rd brake light in exchange of spare tire brake light inside the wheel.
After that, it will have that clean, stealth, black/white contrast look.

Looks awesome bud! I have the same twilight covers and will be installing them Tuesday! Thanks for sharing, I’ve been dying to see what they look like on the white.

 

[HeHateMe]

@Mabett to the rescue...

These are for both halogen or LED.

I just received them and will be trying to install this weekend. Will post pictures. Install instructions list both methods for either halogen or LED.

 

[HCGxKaLiBeR]

any pics of the grille at night? I have one similar and I'm curious

Added pic to the post.

Over the camera there are lots of glares.
Looks a lot better and clearer in person.

 

[Dino357]

Got the LED letters and taillight from Amazon. Both are fantastic.

Letters brightness is just about right during day and night.
Startup dance sequence is a bit cheesy and gimmicky but it only last for like 5 seconds so it is not terrible haha.

Smoked taillight looks good over Oxford white color. Though kind of wished it is not as dark.
I prefer the clear taillight look, though can't find it anywhere yet.
They got their own gimmicky startup dance sequence (Luckily it can be turned off from the switch inside..)
Turn signals are sequential. I really like this part.

Next upgrade will be deleing the 3rd brake light in exchange of spare tire brake light inside the wheel.
After that, it will have that clean, stealth, black/white contrast look.

Looks great

 

[Dino357]

Looks great

 

[Dino357]

I have something like this in mind. When it is not braking, it stays stealthy.
Saw some jeep guys doing it. Looks pretty good as long as not over done.

Connector uses the 3rd brake light plug.
I won't be putting my 3rd brake light back on, so I will tape the splitter

Got the LED letters and taillight from Amazon. Both are fantastic.

Letters brightness is just about right during day and night.
Startup dance sequence is a bit cheesy and gimmicky but it only last for like 5 seconds so it is not terrible haha.

Smoked taillight looks good over Oxford white color. Though kind of wished it is not as dark.
I prefer the clear taillight look, though can't find it anywhere yet.
They got their own gimmicky startup dance sequence (Luckily it can be turned off from the switch inside..)
Turn signals are sequential. I really like this part.

Next upgrade will be deleing the 3rd brake light in exchange of spare tire brake light inside the wheel.
After that, it will have that clean, stealth, black/white contrast look.

I was skeptical about the

I saw that one too. Almost bought it until I went back saw this. haha

Nicelettering

Sponsored