Looks sweet. I couldn’t believe how bright they were either!Wired mine, yesterday. REALLY simple. I wired the Pro6 and similar lights on the side mirrors. Took both the wire sets KC sent and cut them down to TWO wires. Power - going to the pre-wired Bronco set - and the ground onto ground-screws in the engine compartment. Super happy I didn’t screw it up.
Turned them on - in my neighborhood - at dark……and can’t do THAT much - because they are BRIGHT!!!
Wired mine, yesterday. REALLY simple. I wired the Pro6 and similar lights on the side mirrors. Took both the wire sets KC sent and cut them down to TWO wires. Power - going to the pre-wired Bronco set - and the ground onto ground-screws in the engine compartment. Super happy I didn’t screw it up.
Turned them on - in my neighborhood - at dark……and can’t do THAT much - because they are BRIGHT!!!
Can you link the brackets you used for the KC A-pillar lights? Looks great!Looks great!! KC harness leaves a lot to be desired when you have factory AUX Switches! We do the something when installing KC lights here at the shop!
If you are ever in St. Peters Stop in and say
When you say “Link” do you mean run off the same wire? I am guessing the #1 aux has enough to run the extra two. It would be simple to check. But I won’t use all the aux’s and like having the side and the top on different circuits.
Sorry, that was really poor communication on my part. Can you provide the web link to the brackets you used to mount the A-pillar KC lights?
sorry - should have read Pillar - but missed it. Used this one and LOVE it - also found on another post, here.
I'm curious to see how the bar bolts into the mounting brackets?I love mine. Had to use rough country mounts.
