M&R Automotive 30in Light Bar installed

[helifino16]

Thought I'd chime in here as well...

I have the same light bar installed on my Standard Bumper. @MandRautomotive supplied the unique brackets to mount just above the Bumper. Lots of light. Easy install with upfitters (switch 3). Recommended!

Sponsored

 

[MandRautomotive]

Thought I'd chime in here as well...

I have the same light bar installed on my Standard Bumper. @MandRautomotive supplied the unique brackets to mount just above the Bumper. Lots of light. Easy install with upfitters (switch 3). Recommended!

Thanks a lot for posting the photo

 

[paperboy]

Thought I'd chime in here as well...

I have the same light bar installed on my Standard Bumper. @MandRautomotive supplied the unique brackets to mount just above the Bumper. Lots of light. Easy install with upfitters (switch 3). Recommended!

Hi, thought I'd check in. How's the M&R light bar? Any problems with the install on Aux 3?

Just to confirm that you wired directly to Aux 3 and did not use a relay?

Thanks!

 

[helifino16]

Hi, thought I'd check in. How's the M&R light bar? Any problems with the install on Aux 3?

Just to confirm that you wired directly to Aux 3 and did not use a relay?

Thanks!

Still working great. Yes, wired directly to Aux3 (no relay). Admittedly, not much use for this much light around here, but the few times I have used it, it has worked out great. Just the right amount of light where I want it.

 

[paperboy]

Still working great. Yes, wired directly to Aux3 (no relay). Admittedly, not much use for this much light around here, but the few times I have used it, it has worked out great. Just the right amount of light where I want it.

Thanks so much for your input!

 

[SkiRig]

I've also had mine mounted on the mod bumper for about a year and wired it directly to aux 3. It has been great. Mounting it on the bumper has been useful the very few times I've used it because it provides plenty of light without the washout glare that I've experienced with roof mounted light bars in the past. Would highly recommend.

 

[paperboy]

I've also had mine mounted on the mod bumper for about a year and wired it directly to aux 3. It has been great. Mounting it on the bumper has been useful the very few times I've used it because it provides plenty of light without the washout glare that I've experienced with roof mounted light bars in the past. Would highly recommend.

Again, thanks for your input! Appreciate it.

 

[Kmautah]

Been looking at this 30” light bar, if I got the white with amber DRL, does it take two upfitter switches? Or does the DRL tie in with the auto running lights? Sorry if that’s a rookie question
@MandRautomotive

 

[MandRautomotive]

I like tapping the DRL to aux switch 6 and leaving it in on position. It only gets power when ignition is on so technically

 

[CarGuy]

I like tapping the DRL to aux switch 6 and leaving it in on position. It only gets power when ignition is on so technically

What happens if you have the white light and amber DRL switches on at the same time? Did you see some amber?

 

[MandRautomotive]

What happens if you have the white light and amber DRL switches on at the same time? Did you see some amber?

They both power on but white overpowers the amber

Sponsored