M&R Automotive MODULAR BUMPER FOG OPENING LIGHT KIT

[MandRautomotive]

The Ford Bronco modular bumper fog opening light kit is here. It houses 8 x 20w square lights totaling 160W of power. It has a shroud that is powder coated to give it an awesome look. The square lights also offer amber backlight DRL to match the rest of the Bronco marker lighting. The kit is rated at 16,000 lumens all together. The lights comes with few inches of of wiring. If your truck comes with AUX switches you can extend them with our optional wiring harness to the AUX switch hookup spot. If you do not have factory AUX switches you can but a generic wiring harness on Amazon to control the light kit.

Sponsored

 

[BroncoMax21]

Interested to see more and hear more about these. The 4 cluster plus orange drl seem to make it unique.

Edit... Seems easy. These, right? https://mandronline.com/collections...-ford-bronco-led-m-r-modular-bumper-light-kit
Looks sharp on the cyber orange

 

[MandRautomotive]

Interested to see more and hear more about these. The 4 cluster plus orange drl seem to make it unique.

Edit... Seems easy. These, right? https://mandronline.com/collections...-ford-bronco-led-m-r-modular-bumper-light-kit
Looks sharp on the cyber orange

Yes sir. Let me know if you have any questions.

 

[mybikeisred]

I bought and installed them. I am very happy with them and it was a breeze to install.

 

[fraserjr]

I am about to install my M&R modular bumper fog opening light kit. I want the amber lights to wire into the DRLs and the white light on an Aux switch. Two questions, where should I run the wire for the amber lights to have them on when my DRLs are on and what happens to the amber when I flip the Aux switch for the white lights? Thanks!

Edit: Looks like I can just leave the Amber Aux in the permanent on position as it is a delayed accessory and will turn off when the vehicle is off. However, what happens if I have both switches on, can both lights operate simultaneously?

@MandRautomotive

 

[MandRautomotive]

I am about to install my M&R modular bumper fog opening light kit. I want the amber lights to wire into the DRLs and the white light on an Aux switch. Two questions, where should I run the wire for the amber lights to have them on when my DRLs are on and what happens to the amber when I flip the Aux switch for the white lights? Thanks!

Edit: Looks like I can just leave the Amber Aux in the permanent on position as it is a delayed accessory and will turn off when the vehicle is off. However, what happens if I have both switches on, can both lights operate simultaneously?

@MandRautomotive

They can be ran independently. The white just overpowers the amber.

 

[MandRautomotive]

Go out and find an adventure this weekend

 

[fraserjr]

They can be ran independently. The white just overpowers the amber.

Yup, I see that now. Just got them all installed - they look great!

 

[briri]

Are the Ambers powerful enough to be fog lights for use on the road, or just sort of a marker light (light on Raptors) ?

 

[MandRautomotive]

Are the Ambers powerful enough to be fog lights for use on the road, or just sort of a marker light (light on Raptors) ?

Ambers are just DRLs and look cool
White is powerful light

 

[BroncoBill44]

Love the look of these after install. Looks as if they are OEM! Also just ordered their 30” light bar!

 

[Kekov721]

@MandRautomotive what switches should the white and amber be run to (what output)?

Also is the ground wire long enough to reach the grounding point in the engine bay or is there a better place?

 

[Cat]

@MandRautomotive what switches should the white and amber be run to (what output)?

Also is the ground wire long enough to reach the grounding point in the engine bay or is there a better place?

I ran my ambers to Aux switch 6 and whites to Aux #5. 10 Amp is sufficient for these.

Just use a bolt on the back side of the bumper, above each pocket to use as a ground. Each set has their own ground. Assuming you bought the wiring harnass, too.

 

[MandRautomotive]

Love the dual function of this kit

 

[jh3113]

Gonna grab me a set of these when I get the chance!

Sponsored