- First Name
- Brad
- Joined
- Jul 13, 2020
- Threads
- 16
- Messages
- 100
- Reaction score
- 276
- Location
- Marietta, GA
- Vehicle(s)
- 74 Bronco
- Your Bronco Model
- Outer Banks
- Thread starter
- #1
Hi - could use some help. I have a 2021 OBX that had the side steps. I acquired a set of 4 door Rock rails and based on various posts on this thread ordered two of the following brackets to support them from Ford:
M2DZ-54200B38-A and
M2DZ-54200B39-A
The Front bracket mounted up no problem (believe that was M2DZ-54200B38-A, the rear bracket M2DZ-54200B39-A however doesn't match-up for the holes by about 1/8" (holes for the tabs and holes to line up for the nuts from the Rock rail bolts going through the pinch weld. Hoping I'm missing something obvious after over paying for these brackets!
I even tried both brackets on the same side:
M2DZ-54200B38-A and
M2DZ-54200B39-A
The Front bracket mounted up no problem (believe that was M2DZ-54200B38-A, the rear bracket M2DZ-54200B39-A however doesn't match-up for the holes by about 1/8" (holes for the tabs and holes to line up for the nuts from the Rock rail bolts going through the pinch weld. Hoping I'm missing something obvious after over paying for these brackets!
I even tried both brackets on the same side:
Sponsored