Outer Banks wheel fitment question

[craned1020]

Will a 20x9 +12mm offset wheel with 5.47" backspacing running a 35x12.5x20 tire cause me a bunch of issues? Thanks in advance for any help you guys can offer. New to the Bronco scene so sorry if this has been asked before. Vehicle is a non SAS Outer Banks.

Sponsored

 

[Discount Tire]

Hello. The 20X9 + 12 with 35's will fit. You will need to remove the crash bars.

 

[Mark Ski]

I hope you don't mind me jumping in to this conversation, but I also just took delivery of my new '23 Outer Banks. I added the 4" Fabtech upper control arm and spacer lift kit and would like to keep the 18" OB wheels for now. Based on what I have been reading, the 285/75 R18 seems to be the widest 35" at 11" for the 7.5" wheel. Not concerned about the tire height fitting, but will the factory wheel offset of +55 be a problem? I measured about 2" between the Fabtech control arm and the stock 32"x10" tire, so in theory I could go to 12" wide with an inch to spare, assuming you can squeeze 12" onto the stock 7.5" wheel. Some have done this, but the 11" tire seems like the best compromise with the stock wheels. Feedback appreciated! Thanks..

Sponsored