Part number does it exist???

[castro25280]

I'm looking for a rear hinge for my 2023 Bronco Wildtrak. I was replacing the caps they have with aftermarket lights, and the clip snapped off. Ford is telling me they do not have just the hinge, and you need to replace the whole window $1400? Could this be true? I clearly see a nit through the window and it looks like the hinge should be a part you can buy? Does anyone have a part number or know where to get one?

Sponsored

 

[TXBronco1313]

@Ducati1098 will be able to tell you for sure

 

[castro25280]

@Ducati1098 will be able to tell you for sure

Thank you, I'm hoping to not have to shell out 1400 because a piece of plastic broke off??

 

[Area51BS]

Hinge or cover?
Cover is here. https://www.fairwayfordparts.net/v-...4-gas/categories/exterior--tailgatesliftgates

 

[castro25280]

Hinge or cover?
Cover is here. https://www.fairwayfordparts.net/v-...4-gas/categories/exterior--tailgatesliftgates

Neither of those. The actual hinge that the cover snaps to. You can kind of see where the plastic came off. I've tried Loctite but I doubt that will hold. It is held on by the bolt.

 

[flip]

Dealer is correct. Stuff with orange square comes together. If there's a part number next to it (rear washer jet) you can get that part by itself. Hinges right now are a no-go.

 

[castro25280]

Dealer is correct. Stuff with orange square comes together. If there's a part number next to it (rear washer jet) you can get that part by itself. Hinges right now are a no-go.

Ouch that's an expensive mistake then. I wonder if I can find a junker and get it off of that. I'm imaging the Loctite won't hold. If anyone has any other suggestions or super adhesive epoxy let me know...

 

[klill001]

Find a wrecked bronco, they are out there.

 

[Brisco2]

Reach out to Anderson Composites (844-624-2662). I got my hardtop from them and had trouble with my hinge covers staying down. They sent me hinge plates which include the part in your picture. I'm pretty sure they are the same as OEM. Maybe they will sell them to you even if you didn't buy a hardtop from them.

 

[castro25280]

Reach out to Anderson Composites (844-624-2662). I got my hardtop from them and had trouble with my hinge covers staying down. They sent me hinge plates which include the part in your picture. I'm pretty sure they are the same as OEM. Maybe they will sell them to you even if you didn't buy a hardtop from them.

Yes this is all I need!!!! This is awesome, hopefully they will sell it to me.....

 

[castro25280]

Yes this is all I need!!!! This is awesome, hopefully they will sell it to me.....

That phone number is not working though?

 

[Brisco2]

That phone number is not working though?

Sorry, mis-typed 877-624-2662 from their website

 

[Johnny Rebel]

Reach out to Anderson Composites (844-624-2662). I got my hardtop from them and had trouble with my hinge covers staying down. They sent me hinge plates which include the part in your picture. I'm pretty sure they are the same as OEM. Maybe they will sell them to you even if you didn't buy a hardtop from them.

Thanks for this. I just got my Anderson top installed a few weeks ago and noticed the same issue this morning. Haven't had time to call them yet, but knew that others have had this problem.

 

[Provoflyfisher]

JB weld worked perfect on my broken plastic hinge part.

Sponsored