Pinch weld covers!

[JcrOffroad]

These look like they are a single piece of metal that goes over the seam on the exterior only, is that correct?

Yes.

Sponsored

 

[5280Bronco]

@JcrOffroad Are the pinch weld covers something you guys have stock of? Or do you make them as orders come in?

 

[JcrOffroad]

@JcrOffroad Are the pinch weld covers something you guys have stock of? Or do you make them as orders come in?

Yes. Normally on hand.

 

[Snowdogyyz]

Have these been confirmed to work with the Badlands rock rails?

 

[5280Bronco]

Yes. Normally on hand.

Great. Just put an order in, so I was just wondering.

 

[JcrOffroad]

Have these been confirmed to work with the Badlands rock rails?

Not sure why you would need them, those rails cover up pretty well.

 

[5280Bronco]

@JcrOffroad I just wanted to verify that the pinch weld covers are included in the 5-20 business day lead time estimates you guys have on the site? Ordered last Thursday, and hadn't heard anything, but I was hoping they fall in the 5-20 days range and not some of the longer ones. Thanks!

 

[JcrOffroad]

@JcrOffroad I just wanted to verify that the pinch weld covers are included in the 5-20 business day lead time estimates you guys have on the site? Ordered last Thursday, and hadn't heard anything, but I was hoping they fall in the 5-20 days range and not some of the longer ones. Thanks!

Yes. 5-20 range.

 

[5280Bronco]

Should I have any concern about rust if I just put the covers on over the now bare spots from the front screws? Thoughts anyone?

 

[JcrOffroad]

Should I have any concern about rust if I just put the covers on over the now bare spots from the front screws? Thoughts anyone?

I’d hit them with some primer and paint.

 

[5280Bronco]

I’d hit them with some primer and paint.

Gotcha, maybe a quick sanding to knock down the edges around where the bolt was?

 

[JcrOffroad]

Gotcha, maybe a quick sanding to knock down the edges around where the bolt was?

Wouldn’t hurt.

 

[Chelada]

I just did mine with this. It looks really good, so do the JCR ones as well.

.

I'm interested in this approach. Do you just apply painters top above and spray across? I assume you only have to worry about applying to the external side.

 

[Roll Sound]

I'm interested in this approach. Do you just apply painters top above and spray across? I assume you only have to worry about applying to the external side.

I just cleaned the surface. And then taped around the weld area to be sprayed. Remove the tape quickly after or the Wurth will bond with the tape. I did one coat. That Was enough. I just did the outside yes. Do some test sprays on a cardboard box first. Get the hang of the spray and coverage. You'll love it.

 

[MVBB]

I’d hit them with some primer and paint.

aluminum usually doesn't rust.

Sponsored