RCI Offroad Bronco Skid Plates - Kickoff Sale!

[lakesinai]

Hi Guys, we have finally wrapped up the development of our Ford Bronco skid plate system! Take a look and you will see why they are the best skid plates available for your truck!

-3/16" heavy duty steel option = Indestructable, slides over anything
-1/4" Aluminum option, half the weight, and will still take a beating
-Powdercoated with our (nearly) indestructible epoxy black texture
-Full protection of front control arm mounts, intercooler, front differential, electric power steering, sway bar disconnect, oil pan, transmission, transfer-case and more!
-Low profile design maintains exceptional ground clearance, and has nothing to hang up on
-No bolt heads exposed to damage
-Easily removable independently for service

*Check our website this afternoon (6-28) for further specs and ordering. Already in production, turnaround should be within 1-2 weeks

Thank you, those look nice. I prefer the lighter weight aluminum. They are pictured with a metal accessory bumper. Please clarify that they will work with the stock plastic bumper on the OBX.

Sponsored

 

[RCI Offroad]

We are installing on a 21 wildtrak tomorrow and will confirm then, but yes we will make sure they fit!

 

[Rick Astley]

2-door only, I love it!

 

[CashOfLegend]

@RCI Offroad Asking because not answered - Do these cover the catalytic converters and what are the weights? (half of steel for aluminum is great but what does the steel weigh?)

Also the site says exhaust does that mean it covers the muffler too? (I know they don't, more precise language is needed on what is actually covered or pictures of the entire undercarriage that shows all of it.)

 

[unfortunate]

@RCI Offroad curious on weight of steel vs aluminum option as well.

 

[Yillbs]

I have the fab fours skid plate in the front with their bumper, it was like 500 bucks by itself. I really don't want to get rid of it, but I'd like the set of these without the front, is that going to be a possibility in the future, to order individual pieces?

 

[isubronco]

Hi Guys, we have finally wrapped up the development of our Ford Bronco skid plate system! Take a look and you will see why they are the best skid plates available for your truck!

-3/16" heavy duty steel option = Indestructable, slides over anything
-1/4" Aluminum option, half the weight, and will still take a beating
-Powdercoated with our (nearly) indestructible epoxy black texture
-Full protection of front control arm mounts, intercooler, front differential, electric power steering, sway bar disconnect, oil pan, transmission, transfer-case and more!
-Low profile design maintains exceptional ground clearance, and has nothing to hang up on
-No bolt heads exposed to damage
-Easily removable independently for service

*Check our website this afternoon (6-28) for further specs and ordering. Already in production, turnaround should be within 1-2 weeks

@RCI Offroad

I’ll have a 2 door Badlands here in Loveland in a couple weeks if you need to test fit anything.

 

[unfortunate]

I have the fab fours skid plate in the front with their bumper, it was like 500 bucks by itself. I really don't want to get rid of it, but I'd like the set of these without the front, is that going to be a possibility in the future, to order individual pieces?

I noticed today that they do sell individual pieces now.

https://rcimetalworks.com/product-category/ford/bronco/2021-2022-bronco/

 

[RCI Offroad]

@RCI Offroad

I’ll have a 2 door Badlands here in Loveland in a couple weeks if you need to test fit anything.

Thanks for the offer, we would love To install a set on your two door to confirm fitment, let us know If you are available to swing by sometime!

 

[Bird Dog Off Road]

I can attest to the quality of RCI skid plates. Had the Aluminum ones on my ole 5th gen 4Runner and loved them. Did trips to Moab and Ouray with them on and they worked great.

 

[Bird Dog Off Road]

Wish you all had a financing option on your site (I.e, Affirm, PayPal, etc.). :-(

 

[robepa]

@RCI Offroad make that 3 X for the question of stock vs RCI Steel vs RCI Aluminum weights. Thanks!

 

[unfortunate]

@robepa @SnowBronco @BillyGoat
@CashOfLegend
Just found the weights on their site. It’s listed for individual pieces.

Front Bash Plate
Steel- 40lbs
Aluminum- 25lbs

Transmission skid
Steel - 35lbs
Aluminum - 18lbs

transfer case skid
Steel - 30lbs
Aluminum - 15lbs

Whole set:
Steel - 105lbs
Aluminum - 58lbs

 

[Bird Dog Off Road]

Noticed the disclaimer about not being compatible with certain lift kits. Can you guys elaborate on that. Any particular ones or types that might cause interference?

 

[CashOfLegend]

@robepa @SnowBronco @BillyGoat
@CashOfLegend
Just found the weights on their site. It’s listed for individual pieces.

Front Bash Plate
Steel- 40lbs
Aluminum- 25lbs

Transmission skid
Steel - 35lbs
Aluminum - 18lbs

transfer case skid
Steel - 30lbs
Aluminum - 15lbs

Whole set:
Steel - 105lbs
Aluminum - 58lbs

Thanks!

That is a sharp Bronco there. I went Sans-quatch BB White with MIC with rear lockers.

Sponsored