ROCKWORKX tool-less Hardtop Bolts

[Cat]

@Rockworkx

First...I love your products!

I recently received my hard top thumb screws. However, tonight upon installation I ran into a couple of issues.

I have a 2022 2 Dr Wildtrak, V2 MIC Hardtop.

1. A riding condition common to the clamshell bulb seal and Thumbscrew. Ref pics below.

2. Unable to tighten thumbscrew all the way. (They are quite a bit longer than the OEM Bolts). The OEM bolts thread in easily and completely. The second pic is of the Thumbscrew tightened as far as it will go.

Pics attached.

Sponsored

 

[Ksjrb03]

Got my 8 rear bolts and two top bolts this weekend. Absolutely perfect product! Thanks for rising to the challenge of a totally tool less top removal!

 

[STX Bronco]

@Rockworkx

First...I love your products!

I recently received my hard top thumb screws. However, tonight upon installation I ran into a couple of issues.

I have a 2022 2 Dr Wildtrak, V2 MIC Hardtop.

1. A riding condition common to the clamshell bulb seal and Thumbscrew. Ref pics below.

2. Unable to tighten thumbscrew all the way. (They are quite a bit longer than the OEM Bolts). The OEM bolts thread in easily and completely. The second pic is of the Thumbscrew tightened as far as it will go.

Pics attached.

I just ordered for my 2D. Hope I don’t run into this issue.

 

[Rockworkx]

@Rockworkx

First...I love your products!

I recently received my hard top thumb screws. However, tonight upon installation I ran into a couple of issues.

I have a 2022 2 Dr Wildtrak, V2 MIC Hardtop.

1. A riding condition common to the clamshell bulb seal and Thumbscrew. Ref pics below.

2. Unable to tighten thumbscrew all the way. (They are quite a bit longer than the OEM Bolts). The OEM bolts thread in easily and completely. The second pic is of the Thumbscrew tightened as far as it will go.

Pics attached.

Hi Cat, Thanks for your message! We have been made aware of the interference issue on the 2 door broncos and are working on a fix. We will make a smaller Diameter "dial" portion for the aluminum. We have been sending out emails and will need to replace the torx bolts for everyone with a 2-door Bronco!

 

[Rockworkx]

Got my 8 rear bolts and two top bolts this weekend. Absolutely perfect product! Thanks for rising to the challenge of a totally tool less top removal!

Glad you like them! If you have a 2-door, we will need to replace the Torx bolts. The "dial" interfere with the weather strip and we have a fix coming!

 

[Rockworkx]

I just ordered for my 2D. Hope I don’t run into this issue.

If you have a 2-door, we will need to replace the Torx bolts. The "dial" interferes with the weather strip, we have a fix coming!

 

[Ksjrb03]

Glad you like them! If you have a 2-door, we will need to replace the Torx bolts. The "dial" interfere with the weather strip and we have a fix coming!

No mines a 4 door and they fit fine!

 

[Kjbeggs]

We had the "Bronco6G" coupon code before, I just reactivated it today through the end of the month

@Rockworkx
I tried ordering the 10 piece set with the Bronco6G code and got a message that it wasn't valid for the items in my cart.

 

[Chippewa-Pin]

Tha

If you have a 2-door, we will need to replace the Torx bolts. The "dial" interferes with the weather strip, we have a fix coming!

Thank you for your quick attention to this! I have a 2dr and haven't received an email. Should i email or just wait to hear from you?

 

[Rockworkx]

Tha

Thank you for your quick attention to this! I have a 2dr and haven't received an email. Should i email or just wait to hear from you?

Sure thing. I am working through the list now. Please email [email protected] so we can update the list and make sure you get the correct T40's or we get you the replacements when ready. Thanks! G

 

[F OR D]

I'll put a listing up on the site in the next week or so, I'll let you know. Cheers,
G

Did this happen yet @Rockworkx?

 

[Chippewa-Pin]

Sure thing. I am working through the list now. Please email [email protected] so we can update the list and make sure you get the correct T40's or we get you the replacements when ready. Thanks! G

Email sent. Thanks again!!

 

[ddavey4923]

We will be doing a limited gunmetal grey on the current run. So about 7 weeks out.

Am I able to place an order for the gunmetal grey yet?

 

[Rockworkx]

Am I able to place an order for the gunmetal grey yet?

I have not made a listing for these yet will try to get to it asap. We have started production on a limited run though, so they are in process. Cheers, G

 

[F-Spot]

Somebody has to ask for the code to be reinstated every month...I'll be that guy this month lol. Any chance you can reinstate the forum discount?

Sponsored