RTR Bronco Everglades #25 adds RTR Bracket + Project X Light Bar Full Install

[B34R]

Any info on the lights next to the headlights?

Those lights are part of the RTR Grille

Sponsored

 

[Dom]

Nice install vid. So the ford supplied Aux wire is sufficient enough to handle the amperage of this light bar? What's the draw for these lights?

 

[Area51BS]

That is a really cool looking Bronco!

 

[Middleton Motorsports]

Any info on the lights next to the headlights?

That's a @RTR Vehicles Grill

 

[Middleton Motorsports]

Nice install vid. So the ford supplied Aux wire is sufficient enough to handle the amperage of this light bar? What's the draw for these lights?

Yes, that handle the amperage with no problems at all.

see MM_Mikes response below:

 

[MM_Mike]

Nice install vid. So the ford supplied Aux wire is sufficient enough to handle the amperage of this light bar? What's the draw for these lights?

The factory wiring is sufficient to power the Project X lights. They consume 30watts per light so a total of 150watts and at 12v that comes to about 12.5amps for the circuit which is within the 25amps for AUX switch 1. The wiring from the engine compartment all the way to the lights is 1.5mm. It is well within the limits.

Middleton Motorsports Team
-Mike

 

[Middleton Motorsports]

Those lights are part of the RTR Grille

Yes, they are made by @RTR Vehicles

Sponsored