- Thread starter
- #1
It was a nice day here in East TN, so I took the top off for a bit. While I had it off I decided to install the side shelf covers. Shelf covers They went on pretty easy with double sided tape for the most part. You have to take out the three bolts along the top of the fender, then install the cover, and reinstall the bolts. The bolts had paint on them from the factory, when I got done the paint was all messed up, so I have to touch them up. Not a big deal, but another little job for me to do when the weather gets warmer. Here is a shot of the drivers side installed. Gives it a finished look when the top is off.
Sponsored
Last edited: