- First Name
- Dustin
- Joined
- Jul 20, 2022
- Threads
- 43
- Messages
- 211
- Reaction score
- 240
- Location
- Boardman, OH
- Website
- www.BachBuiltOffRoad.com
- Vehicle(s)
- 2022 Bronco Outer Banks/ Badlands on order 7/9/21
- Your Bronco Model
- Outer Banks
- Thread starter
- #16
did you figure out a way to get the green wire over to a fuse tap or aux switch for the backlights on the roof light bar?
Well the bumper lights use the green wire back by the fire wall, and a white wire that feeds to the fuse panel on driver side knee panel, and this connects to Aux 5.
As for the light bar, I had to pull visors off and take windshield trim down and then expose the grey wire with orange tracer in the harness on the passenger side. then use a splice crimp to hook that up. There was another wire (grey/orange) on passenger side kick panel that needed crimped to a white wire (same location) and this hooked the light bar to Aux 1 switch. It was all included in the RTR instructions and very well explained. Easy to use setup
Sponsored
Last edited: