What Did You Do To Your Bronco Raptor Today? 🔧 🧰 🪛

[BROGAN]

So I added some decals to the Raptor emblem. I think it really makes it pop. Couldn't really make out the logo before unless you are right up close. I was thinking about pulling the trigger on the decals for the front FORD letters. Thoughts? Has anyone done this, and how do you like it?

Sponsored

 

[SilverStreak02]

BLUMAK3D TrailSight Deletes

Mabett Rear Seat Back Covers

Mabett Front Door Storage Pockets

I also installed the TripleALiners Center Console Organizer but didn’t take a photo.

The Mabett Rear Door Pockets and Tekk Shorty Antenna are arriving today.

 

[vrtical]

Installed M2M door pockets I won at Supercell.

 

[Johnny Rebel]

Installed M2M door pockets I won at Supercell.

Did you have any problems with the OEM screws being too short when attaching them?

 

[vrtical]

Did you have any problems with the OEM screws being too short when attaching them?

I did not with the M2M one, the attachment plate is fairly thin.

 

[Johnny Rebel]

Thanks. I installed the old Mabett metal ones on my Big Bend and had that problem. Was just curious if the M2M's were different.

 

[bb163]

Spacers to protect your wheel right @bb163?

Any concern about the loading? That is a lot of force and a lot of torque especially with two bikes added to a heavy tire itself. It does look like you did an aftermarket tire/gate reinforcement/replacement. Good call if so. Regardless, not sure I would wheel very hard with the rack or rack+bikes.

Just saw that I never responded in regard to the spacers. I include cone spacers to protect the lug seat of the rim from the stud extender. I ended up making an etsy page for it.
https://www.etsy.com/listing/1721681691/1up-bike-rack-spare-tire-adapter
https://www.etsy.com/listing/1707571350/bronco-tailgate-limiter-6th-gen

 

[swamp2]

Rockslide Engineering Tailgate Table:

This model has a high weight rating of 100 lb, has quieting bumpers, a bottle opener and magnetic clasp.

Although I'm sure the supplied sheet metal screws would achieve the stated weight limit, I opted for a stronger and more easily removable mounting method - rivnuts.

Then attached with stainless M4 socket pan head cap screws and washers.

Finally done with quick lunches on top of a cooler, on my lap or on a nasty public picnic table.

Final tip: Upper right mounting hole has a backing steel sheet behind the visible body colored one preventing full rivnut insertion. The backing sheet was safely drilled without risking wiring or other components.

 

[UniBroncorn]

I washed it

Sponsored