Wildtrak HOSS Leveling Kit?

[Geronimo]

I have only seen that kit on a Braptor with Hoss 4.0 but Iimagine it would be similar.

https://www.bronco6g.com/bronco-raptor-gets-39-bfg-ko2-tires-rpg-coil-spring-perch-collars/

update: they actually have 1.5 up front and 2.25 in the rear since the spring is softer. I would email rpg lol

Seems back asswards!

Sponsored

 

[JackTripper]

Foutz motorsports said they are working on them, think it was stated in the Foutz raptor leveling thread.

Just looking for a 1 inch lift in the front.

I emailed FOUTZ and they responded saying they have one that they’re prototyping right now. This email took about two weeks ago. We will see.

 

[ohnoauto]

Just looking for a 1 inch lift in the front.

I emailed FOUTZ and they responded saying they have one that they’re prototyping right now. This email took about two weeks ago. We will see.

Did you end up finding anything? Looking for the same.

 

[colonelburke]

I have looked into this and I see three options for you, and there are likely others, but Foutz Motorsports, RPG, and SVC. I haven't purchased one of these and don't know which one I will get. Just letting you know what I found. Good luck.

 

[Swain]

I would think that any top hat spacer type leveling kit should work on the hoss 3.0, I used the Fabtech 1.5” leveling kit on my Wildtrak with hoss 3.0

 

[JackTripper]

Did you end up finding anything? Looking for the same.

I use the standard 1 inch spacer in the front by rough country. It works amazing. Installed and aligned.

Did you end up finding anything? Looking for the same.

I used the 1 inch spacer from rough country. Installed and aligned. Works perfectly with my HOSS 3.0.

 

[kjoy0916]

Thanks, that's the only one I have seen available so far. Would probably go 2.25 front and 1.5 rear. Was hoping someone would chime in that has this installed.🫤

Thanks, that's the only one I have seen available so far. Would probably go 2.25 front and 1.5 rear. Was hoping someone would chime in that has this installed.🫤

I have installed RPG 2.25front 1.5rear w/ 37s they work well no rubbing but the front is a tad bit lower still. I think I would go with 3inch front and 1.5 rear.

 

[TTT]

I have installed RPG 2.25front 1.5rear w/ 37s they work well no rubbing but the front is a tad bit lower still. I think I would go with 3inch front and 1.5 rear.

any feedback on off-road performance, any changes ? I'm considering this, but haven't heard that many opinions about ride quality in road and off-road

 

[kjoy0916]

any feedback on off-road performance, any changes ? I'm considering this, but haven't heard that many opinions about ride quality in road and off-road

Honestly I have ran this thing pretty hard and haven’t noticed a difference. Ride quality feels the same. Just more road noise now with actual M/Ts.

Sponsored