Wildtrak vs The Gatekeeper @ Valley of the Moon Trail

[Myke98]

Nice videos. Great looking build

What sliders are you running?
Do you have a build thread?
If not, please make one.

Thanks!

LOD sliders.

No build thread yet.

Sponsored

 

[Myke98]

I keep meaning to go down there. I see your King shocks, did you lift the vehicle as well? I also spy BFGs, still 35"?

The Kings gave me about 2" of lift but I did not measure before and after.

The tires are 37" KM3's. I have 1.5" spacers on the stock wheels and I do have a bit of rubbing on the fender liner at the lower rear of the fender well.

 

[Myke98]

If you have the rear sway bar just full time disconnect it? I haven't had on on the front for months, handles fine

No rear sway bar and I am going to try running with the front disconnected, you are not the first person that mentioned that to me.

 

[SROC3]

Very nice climb!!! I'm sure those Killer KINGS had a little to do with it HAR HAR! I'm supposed to get some as well. Did you change your upper control arms and rear trailing links as well? If so, what brand?

 

[Last Ride Bronco]

Reminds me of the Texas OffRoadeo!

 

[Myke98]

Very nice climb!!! I'm sure those Killer KINGS had a little to do with it HAR HAR! I'm supposed to get some as well. Did you change your upper control arms and rear trailing links as well? If so, what brand?

I did change them to Camburg's. I probably could have stayed stock, the King install instructions they show stock UCA's.

 

[SROC3]

I did change them to Camburg's. I probably could have stayed stock, the King install instructions they show stock UCA's.

Nice and tubular Camburg's?

 

[Myke98]

Nice and tubular Camburg's?

Billet ones

 

[SROC3]

Billet ones

Ohhhhhh..........SEXY. I'm getting the whole ICON Tubular set for front and rear. I'm only planning to lift by about an inch over what the KINGs are stock. And staying 35s.

 

[Myke98]

 

[clpray16]

Billet ones

Did you have to add pre load to the rear to get it to ride level? I have my front the same as yours but had to crank the rears up

 

[Myke98]

Did you have to add pre load to the rear to get it to ride level? I have my front the same as yours but had to crank the rears up

I didn't touch them. Front ended up 1" lower.

 

[mpeugeot]

Like butter! Next on the list is a sway bar disconnect.

I found your sway bar disconnect...

Should fix the problem quickly...

Sponsored