Will pay for help! Need help identifying part number on Bronco Raptor

[BroncoDoctor]

Any Raptor owner who is willing to help me track a part number? I’d pay you for your time (Venmo). I need the engineering number or base part # off the back of this trim piece. Thank you!!!

Sponsored

 

[35tires]

Is that the brace?

N2DZ-7841304-B
W520823-S439 HN1
W710809-S450B HB1

 

[BroncoDoctor]

Is that the brace?

N2DZ-7841304-B
W520823-S439 HN1
W710809-S450B HB1

@flip

 

[flip]

BrDr is looking for the trim under the front reinforcement pic with arrow. Parts cat has trim part number for rear one but between microcat and Ford Ecat, neither has a pic or listing for the front one. I either need the base part number (middle number) or a pic of the engineering number on the back of the trim piece. I have a HVBOM for a raptor but no idea what base that piece carries and the part description for these doesn't help any.

 

[BroncoDoctor]

BrDr is looking for the trim under the front reinforcement pic with arrow. Parts cat has trim part number for rear one but between microcat and Ford Ecat, neither has a pic or listing for the front one. I either need the base part number (middle number) or a pic of the engineering number on the back of the trim piece. I have a HVBOM for a raptor but no idea what base that piece carries and the part description for these doesn't help any.

@flip check your messages

 

[OnTheRocks]

The trim for the front reinforcement on the Raptor is actually three pieces:
P2DZ-7824356-AA (RH side), P2DZ-7824357-AA (LH side), and P2DZ-7824357-BA (center). The torx panhead screws on the outer ends are W721756-S450B.

 

[BroncoDoctor]

The trim for the front reinforcement on the Raptor is actually three pieces:
P2DZ-7824356-AA (RH side), P2DZ-7824357-AA (LH side), and P2DZ-7824357-BA (center). The torx panhead screws on the outer ends are W721756-S450B.

For the bolts, W721756-S450B isn't a valid part #. Did you by chance copy this down wrong?

 

[OnTheRocks]

The service part number for the fasteners was just set up on Wednesday. It will be a day or two before it appears as active.

Sponsored