Bronco Raptor MRT Performance King Of The Hill & Extreme H-Pipe Exhaust Options [Updated with First Look & Listen]

NEW UPDATE 4/25 - King Of The Hill H-Pipe



We are thrilled to announce the arrival of our SECOND BRAPTOR OFFERING – the King Of The Hill H-Pipe! Crafted with precision and passion, this handcrafted exhaust upgrade is tailored specifically for the Bronco Raptor, elevating your off-road adventures to new heights.

Key Features of the King Of The Hill H-Pipe:

• Two MRT straight-through performance-designed mufflers for reduced back pressure

• Increased ground clearance, enhancing off-road capabilities

• Handcrafted from the highest quality T-304 Stainless steel for durability and performance

With the King Of The Hill H-Pipe, you can expect to elevate your driving experience beyond compare to stock mufflers. It's the perfect combination of power, performance, and style, tailor-made for the Bronco Raptor enthusiast.


FIRST LOOK! Extreme H-Pipe



0:00 - Medium takeoff / off the pedal
0:30 - Light acceleration / light load
0:54 - Off-throttle deceleration
1:12 - Wide Open Throttle
1:25 - Casual cruising

Audio used was a mix between interior and exterior.

We're thrilled to announce the latest addition to MRT Performance's lineup: the Extreme H-Pipe for the Bronco Raptor! This innovative exhaust system is designed to take your off-road experience to the next level.

Engineered with ground clearance in mind, the Extreme H-Pipe replaces the stock muffler to enhance your Braptor's off-road capability.

Designed to fit to the factory flanges and factory over axle inlet clamp. No modifications or cutting is needed. This system uses the factory flanges and clamps for a quick and simple install that can simply be put back to stock at anytime.

But that's not all – this system ensures you'll be heard before you're seen, with a commanding exhaust note that announces your presence on the trail. And during casual cruising, you'll enjoy an unobtrusive tone that still lets you hear gear shifts and the appealing hum of the engine.

When you unleash the power of the Bronco Raptor's twin-turbo engine, our Extreme H-Pipe lets it shine, amplifying those turbo noises and delivering a performance soundtrack without any unwanted drone or discomfort.

Even at freeway speeds, you'll appreciate the pleasant exhaust note that perfectly complements the rugged, aggressive nature of the Braptor, while still allowing you to hear the road and wind noise.



The Extreme H-Pipe from MRT Performance: the perfect complement to the Bronco Raptor's rough, aggressive, and capable attitude.

I can pretend to live in Michigan.

Fuggggetaboutit!

Bschurr said:

Fuggggetaboutit!

Click to expand...

We just had someone drive from Boston to Metro Detroit for exhaust development for another vehicle.

MRTperformance said:

We just had someone drive from Boston to Metro Detroit for exhaust development for another vehicle.

Click to expand...

LFG!

We received a call from an interested Raptor owner. Development will begin in two weeks!

All bronco raptors!!



…that’s are in Michigan

Figures....middle of nowhere Maryland loses again. Looks like something else I'll have to pay full price for when it's developed.
I love MRT on the Bronco Sport....sheesh!

The Development Braptor has officially rolled into MRT's facility, marking the beginning of an exhilarating chapter!


Our team is gearing up to kick off development imminently, with the ambitious goal of having a cutting-edge exhaust system designed and primed for manufacturing by week's end!

Keep your eyes peeled for regular updates as we work tirelessly to deliver an exhaust solution that's set to redefine the sound of the Bronco Raptor!

Well shoot, I’m a day late. If you’re looking for another raptor, I’m in Michigan too

Can't wait to hear the results! The stock Braptor exhaust is straight through until your talking about the stock muffler on the Braptor.

Wow, that stock muffler is very complicated. We want to provide a high quality, low cost mod to get the most out of a Braptor without dropping gobs of money like you can on some other cat backs on the market.

NO need for us to do a full cat back and charge you guys for that cost when 2/3s of the Braptor system are high flowing and do NOT need to be replaced. We are working on a simple flange to flange system that bolts right up allowing for a quick install while allowing to swap the factory muffler back in easily if needed.

Raptor owners! Let us know what you are looking for in an aftermarket exhaust! As we mull over the possibilities, we want to hear from the community to help guide our development goals. We found that the stock exhaust setup leaves a lot to be desired. Please let us know your thoughts as we move forward on this endeavor.

Will your system allow us to retain all the valves?

Drkness said:

Well shoot, I’m a day late. If you’re looking for another raptor, I’m in Michigan too

Click to expand...

Great to hear from you! Yes, we're definitely interested. Please give us a call at 734-455-5807 at your earliest convenience. Looking forward to connecting!

Tye said:

Will your system allow us to retain all the valves?

Click to expand...

We're currently in the evaluation stage regarding the retention of OEM stock valves.

I think the factory exhaust is great. BUT... It hangs sooo low! I need ground clearance for rock crawling. I don't need/want more noise. Performance is great as-is.

Cost effective increase in ground clearance and I'm a buyer.