Rear License Plate light - Fuse Location?

[GloNDark]

I installed my DV8 rear bumper and I'm having a hell of a time getting the license plate light to work.

Stock light was working fine, I tested the LED that DV8 sent me and verified it worked. I cut, soldered and shrunk wrapped everything. I'm thinking I popped a fuse in the process. But holy crap, there is no solid information on what fuse that is. Anyone know?

Sponsored

 

[swami37]

Get a multi meter and test them all

 

[GloNDark]

Get a multi meter and test them all

That's the plan tonight. It's been so damn hot out I was being lazy. Time to get after it. haha

 

[etmccaus86]

I installed my DV8 rear bumper and I'm having a hell of a time getting the license plate light to work.

Stock light was working fine, I tested the LED that DV8 sent me and verified it worked. I cut, soldered and shrunk wrapped everything. I'm thinking I popped a fuse in the process. But holy crap, there is no solid information on what fuse that is. Anyone know?

Wow, you aren't kidding.
Half-tempted to spring for a weekend pass to the service portal and see if they have any better fuse mapping on that.

 

[da_jokker]

Did you look at that fusebox.info site? Don't know if that will show something extra or not.

The wiring diagram shows as connected to the body control module, but unfortunately it doesn't list fuses.

 

[etmccaus86]

Did you look at that fusebox.info site? Don't know if that will show something extra or not.

The wiring diagram shows as connected to the body control module, but unfortunately it doesn't list fuses.

Looking through FSM, I don't see anything specifically called out fuse-wise for that lamp. Do see some for BCM...so to da_jokker's point, maybe look at those?

Sponsored