22 4Dr Wildtrack with Bilstein 6100 + ARB Heavy Springs

[Barrel Knight]

Greetings, I purchased Bilstein 6110 with 4 ARB heavy-duty springs for my 22 4Dr Wildtrack hardtop. Does anyone have the same setup? I'm not sure whether Arb Springs would work with Bilstein 6110. I have a Trailrax roof rack (50Ib) + GFC Superlite RTT (89IBs), an ARB summit bumper + Warn 10K winch. Are those set up heavy enough to fulfill the need for "Heavy rating springs"? Or I should use the factory SAS springs?

Sponsored

 

[PWillette]

I don't have either but I suspect the HD springs will be too stiff. Someone here tried the Dobinson heavy duty springs with negative results. What are the ARB spring ratings?

 

[Lak34ers]

Greetings, I purchased Bilstein 6110 with 4 ARB heavy-duty springs for my 22 4Dr Wildtrack hardtop. Does anyone have the same setup? I'm not sure whether Arb Springs would work with Bilstein 6110. I have a Trailrax roof rack (50Ib) + GFC Superlite RTT (89IBs), an ARB summit bumper + Warn 10K winch. Are those set up heavy enough to fulfill the need for "Heavy rating springs"? Or I should use the factory SAS springs?

I think you would be fine with stock SAS springs. Ring 6 on both might be . I have a bamf bumper and 10s winch on front and at ring 6 the back is 1.5 higher. So I might drop the rear a bit where you might be perfect.

 

[Sloth]

The ARB OME springs are designed for their shocks. They won’t work on the Bilstein 6110. Dobinsons makes a good spring in several different weights depending on your application. They ride fine so long as you match the spring to the shock.

 

[Va6gBronco]

My five cents. Running ARB heavy springs and old man Emu shocks. Leveled out the back…2.5” lift. Front up about 1.5”. Added weight: 150 lbs winch and JRC winch mount, GOBI roof rack. When going camping we have the pak mule receiver rack loaded with cooler, wood and stove. Roof rack at 300 lbs capacity and 4 people. The ride is fine. Without the camping gear the ride is much better than the stock suspension. No diving while your braking etc etc.

 

[Barrel Knight]

The ARB OME springs are designed for their shocks. They won’t work on the Bilstein 6110. Dobinsons makes a good spring in several different weights depending on your application. They ride fine so long as you match the spring to the shock.

Oh thanks a lot, I will return my ARB Springs

Sponsored