Sponsored
dadjoke's latest activity
-
Hey, yep it's hot out. But IMO my brakes, specifically Driver Front brakes are too HOT when I get where I'm going. It's been happening...
-
dadjoke replied to the thread Our MatrixâStyle Bronco Grille Is Back In Stock!.About 50 members here that i've ignored because i'm tired of seeing that they added another 12 billion lumens is why.
-
More men should journal.
-
dadjoke replied to the thread Good by Bronco.gud by to another user who was probably gonna spam "what's the BEST___" posts everywhere
-
dadjoke replied to the thread GIVEAWAY ALERT! TeraFlex 3.5" RT3 Suspension System with Falcon Fast-Adjust Coilover Shocks.Mkay
-
dadjoke reacted to Ducati1098's post in the thread California Ford Performance Calibration w/ProCal 4 (21'-26', 2.7L) with
Like.
Both the procal, and the calibration are VIN locked. If this was installed on a vehicle, itâs a complete paper weight to any other vehicle. -
dadjoke replied to the thread Ford Bead Lock Capable Wheelâs Question, Thanks!.Yep! The heads aren't very deep so I use a torque wrench and take my time but have still lost probably 2 or 3 during my stainless to...
-
dadjoke reacted to RK Racing's post in the thread Ford Bead Lock Capable Wheelâs Question, Thanks! with Like.
Can I assume that you just simply removed the rings at home and then took them to the shop for mounting?
-
dadjoke replied to the thread Product Update: powoq overhead sunglasses holder is now live!.Its between the clamp and pin for the Driver's roof panel above the Driver side visor. Hangs down in the one section that doesn't have...
-
dadjoke reacted to Nibroc99's post in the thread Product Update: powoq overhead sunglasses holder is now live! with Haha.
Thought it was pretty clear to me. It mounts above the visor onto that overhead trim piece on the passenger and/or driver side. Looks...
-
dadjoke replied to the thread Ford Bead Lock Capable Wheelâs Question, Thanks!.Yea, "Beauty Rings". I've seen it claimed that they don't need to come off to install/uninstall tires, but both shops I've been to...
-
dadjoke reacted to Nibroc99's post in the thread EZ4x4 rear top lift outdoor storage cover? with Like.
I don't have a garage, unfortunately. If I did, I'd be storing it in that! lol.
-
dadjoke replied to the thread EZ4x4 rear top lift outdoor storage cover?.I have a different brand, but similar enough construction I suppose - I store mine right in the garage, just pull the front end over the...
-
dadjoke replied to the thread GRMS radios.I'll second this one. Radio is almost completely undetectable when the handset is disconnected, positioning is solid...the only...
-
(34) Super Clean GMRS Radio Install! | Bronco6G - 2021+ Ford Bronco & Bronco Raptor Forum, News, Blog & Owners Community I have this...
-
You didnât mention what, if any type of aftermarket accessories are on the vehicle or if itâs bone stock. If it were me, I would start...
-
dadjoke replied to the thread Ford offering Navigation after trial - is it worth it?.I glued mine to the windshield - it's a HUD. For sale $6000 no lowballers
-
dadjoke replied to the thread Ford offering Navigation after trial - is it worth it?.Pop up directions in the cluster on my 22 as well
-
dadjoke replied to the thread Wolfbox Mascot - Your Opinion Matters!.
-
-
It's now available but $1,300 is a little high IMO...
-
dadjoke replied to the thread Recall 26S55: 2021-2026 Bronco - Engine Compartment Wiring Harness Repair [July 23, 2026] -- 590,000k units affected.Could this be what's causing my non-front-camera-having bronco to be telling me that my front camera is temporarily unavailable for the...
-
dadjoke reacted to userdude's post in the thread What's the Biggest Lesson You've Learned Off-Roading? with Like.
"No honey, you're perfect, you're great. It's just this time I gotta go out with Ted because, uh, his dog died! He's so sad about it...
-
dadjoke reacted to CitrusBronco's post in the thread Windbreakers, WindJammers and tonneau covers. Why can't we have cool stuff? with Like.
Some more options would be nice. Iâm a little freaked that youâre still waiting on summer to come, itâs the end of July already.
-
dadjoke reacted to HotdogThud's post in the thread $259.99 Tube Fender Flare Delete - Arrive Soon! with Love.
I do love that compat style.
-
@dadjoke Our interface has a total of 4 video inputs that you can toggle through
-
dadjoke replied to the thread Front camera.Y'all have a version that adds multiple cameras? I have a ridiculous vision in my head about adding ~3 forward facing cams in different...
-
dadjoke replied to the thread What's the most "worth it" upgrade you've made to your Bronco?.So far the only one that wasnt worth it was the under hood LED strip, and that's just because I got a bad one.... Most worth it is...
-
dadjoke reacted to HighVelocity's post in the thread What's the most "worth it" upgrade you've made to your Bronco? with Like.
Everything. I don't buy it if it doesn't solve a problem.
-
dadjoke reacted to Deadpool392's post in the thread What's the craziest thing you've seen behind the wheel? with Haha.
Found the video of the tacoma driver and his wood⊠he will be on the right side as I pass him.
-
dadjoke replied to the thread Custom HUD from Korea.I'm 2" taller than the Mike above, also a Mike, and have the same question. (Hi Mike!)
-
dadjoke replied to the thread Rough Shifts since oil change.Check your oil level, iirc this happens on overfill.
-
dadjoke replied to the thread What's the craziest thing you've seen behind the wheel?.A couple terrible examples of concrete load management... But really the -est is 'truckboat'
-
-
Hey all, Getting my front windows tinted to match the back. Thoughts/feedback on getting the windshield done too?
-
dadjoke reacted to BigMeatsBronco's post in the thread (Update 11/8/25...Its ALIVE!!!) 760hp 5.2 supercharged (GT500) Predator engine swap Bronco info thread with Love.
Exhaust is finished! Fantastic parts and excellent craftsmanship from SPD Performance !!! Fully Tig welded. Extremely happy with the...
-
dadjoke replied to the thread The Next Gen TrailDeck is Coming: TD, SE, and the All-New "L" Series!.Why not just attach the fridge? whole platform slides? I tied my fridge down with a single ratchet strap, it worked great
-
dadjoke replied to the thread What tires does everyone run?.KO2s (drool)
-
dadjoke replied to the thread Looking for inspiration: LED integration in grille.Looks like the whole yellow space - but IDK where they live/how they drive And hey OP: Gruezi or Bonjour or Bongiorno or Allegra -...
-
-
dadjoke reacted to 11811's post in the thread Looking for inspiration: LED integration in grille with Like.
Blocking the radiator like that doesn't cause you cooling problems?
-
So you installed springs that are designed to lift the front 2" and the rear 1", and you ended up with the rear end 1" lower? :unsure:
-
Today a Walmart greeter saw my wife in a Bronco tee and ask her if she owned one. She replied yes and he said I have something in my car...
-
So I wanted to have the doors off but my dog fully secured. Ended up with a ruffwear 3 buckle harness and the Kong tether that attaches...
-
Not me, just shared this for the other entrepreneurs in the group. I've been considering their battery mount for a solenoid disconnect...
-
dadjoke replied to the thread Under hood accessory mounting platforms.Okay I'll bite. What ya mounting there?
-
dadjoke replied to the thread Jay Leno features the Bronco Roadster Concept.I wish they'd made the flares all the same color as well. looks funky.
-
dadjoke replied to the thread Aaftermarket Heritage fenders or fender deletes?.The Heritage models have a different profile, they're slightly squared - hence the issues with aftermarket support
-
dadjoke replied to the thread Blackhawk Ridge Crawler R/T Tire Feedback or Review?.All the broncos at the off-roadeo I went to were Sasquatch and had the Wranglers. Seems odd that they'd throw a random other brand on...
-
dadjoke reacted to Jdc's post in the thread Ford rehires âgray beardâ engineers after AI falls short with Like.
I heard Ford fired him as a quality checker because he never let anything pass.
-
What did you do!? Wow that's a hard hit...
-
Well, I'm a jackass. just an FYI, if you're looking at the Ford Performance Raptor Skidplate kit, it's a hard pass, this g-out wouldn't...
-
dadjoke replied to the thread Rear Dashcam Holder/Mount - 3D Print.Wow great job op. My '22 has a semicircular cutout there that I used to mount mine, it's interesting to see what they've done in the...
