Sponsored
userdude's latest activity
-
userdude replied to the thread First Mystery On My New Bronco.I heard a lot of "is there a window rolled down back ?!?" in my 2dr. Turns out the rear seal was "flat' and needed to be replaced. Take... -
Frankly, I don't think it makes a beans bit of difference!
-
userdude replied to the thread E load tires are way overkill.Do you have ad blockers or privacy browser add-ons? Sounds like a browser memory leak. You might try a different browser, like Firefox...
-
userdude replied to the thread E load tires are way overkill.I don't know if it's funny or disturbing that I just made the connection of a "ball park" and uh "crotch".
-
Depends on what pressure you run 'em at. Chaulk test will get you in the ballpark.
-
I get it, but also sometimes its handy to make your own thread on something specific so that all your relevant opinions needed are...
-
userdude replied to the thread What Made You Fall in Love With Off-Roading?.I had always liked the Blazer (and my second ride was an 86 Ram Charger), but one day in 99(?) my friend picked me up in his Dad's 97...
-
userdude replied to the thread Upgrading to Rear & Front Lockers - Control Modules.You mean the buttons on the dashboard? I don't know anyone has figured that out. Those are computer I/O inputs, not true hardwired...
-
userdude reacted to Iowa Hawkeye's post in the thread Thoughts about my Bronco from a Jeep guy! with
Haha.
Good looking Bronco, I'm 6-4 and always wanted a Jeep, would test drive one every couple years thinking they would redesign the leg... -
userdude reacted to hutchman's post in the thread Thoughts about my Bronco from a Jeep guy! with Like.
A picture of the Bronco: Not much to say other than it's a base, Sasquatch, with an auto. I like it just the wayt it is and since I...
-
userdude reacted to Eldowerks's post in the thread Thoughts about my Bronco from a Jeep guy! with Like.
First Jeep I’ve driven since driving a straight fender Willy’s 50 years ago was a new Jeep Wrangler 4 door hard top rental to drive from...
-
userdude replied to the thread Thoughts about my Bronco from a Jeep guy!.That rearview mirror is priceless, It prevented you from making a bad decision! :LOL:
-
userdude replied to the thread 2025 Badlands Differental Cover.Just went out and checked; looks totally fine. Been on there 18 months. I did have them reuse the stock gasket, which apparently is a...
-
userdude replied to the thread 2025 Badlands Differental Cover.I think there was a bad run. I guess it might be a crapshoot. ARB has one I believe that some people like. You might do a search for...
-
userdude replied to the thread 2025 Badlands Differental Cover.I have the FP one and I've had none of those problems. Everyone else has had so much more fun than me! 🤔
-
userdude reacted to HighVelocity's post in the thread Thoughts about my Bronco from a Jeep guy! with Haha.
Blah blah...Heep...blah blah...solid axle...blah blah...slushblox...blah blah....veesix....blah blah....IFS....blah blah 2-door. Well...
-
userdude replied to the thread Ford offering Navigation after trial - is it worth it?.Oh yeah, it'll definitely affect your on-vehicle services. Memory seats will stop working. UFO detection and evasion will stop working...
-
userdude reacted to Brian_B's post in the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi with Like.
Yeah I don't get this either. The number on the door is the max safe weight from the manufacturer, not the actual weight. And then just...
-
userdude replied to the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi.Say 4dr without saying 4dr, just sayin'! :whistle: :LOL:
-
userdude replied to the thread Door Rubbing on the Body.I worked with a guy as an apprentice electrician who had been a tow truck driver for many years. He calls me up one day after work and...
-
Yep happened to me also...I suggest getting your video camera ready and recording the action the bodyshop does to the door....I...
-
userdude replied to the thread Pulled a camper with my BadSas 2.3."Why all the hottakes and opinions over and over!! So tiresome!!" *Throws out their own hottakes and opinions.* "Everyone should...
-
userdude replied to the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi.I hear about these manufacturer inflation tables, specifically Toyo's...
-
userdude replied to the thread Bad keyless lock design?.I didn't even know you could that.
-
IThat’s a pretty dramatic response to a minor usability criticism. Yes, in a quiet environment you can usually hear the locks actuate...
-
Very useful mod. https://www.bronco6g.com/forum/threads/my-ocd-modification-of-central-console-lid.66304/page-3#post-2284812...
-
There is a thread somewhere here where a member created a shim that can be inserted into the spring to increase the tension and the lid...
-
userdude reacted to Brian_B's post in the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi with Like.
Just looking at your pic you can tell it's gonna wear center heavy - look at the dust imprint on the tread. The outside of the outer...
-
userdude replied to the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi.You might consult your dental insurance first. đź’Ż
-
userdude reacted to Brian_B's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Haha.
Wait what? What is this nonsense? You have your priorities backwards Mister.
-
userdude replied to the thread Where Does Your Phone Usually End Up in Your Bronco? 📱.In my hand, where it belongs. Other drivers keep yelling at me it belongs up my ass, but I dear sir believe they are misguided, because...
-
userdude replied to the thread Diff Drop with 37s - Have you had any problems with your CV axles.I think Andy is saying it's a tradeoff which is one he's not keen on, since he sees the added gain in down travel closer to the red line...
-
userdude replied to the thread Diff Drop with 37s - Have you had any problems with your CV axles.Hood mounted triangulated CVs with aerospace toilet plungers, on the next, Maury Povich!!
-
userdude reacted to 87-Z28's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Haha.
Diff Rise is the new diff drop. Skip UFDU, mount shinny aluminum M190 on the hood. Not just correcting geometry but improving it. How do...
-
userdude reacted to MongoTheBronco's post in the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!! with Like.
100%!! The second "3D printed" pops up in any way it immediately raises red flags. 3D printing is used due to the internal geometries...
-
userdude reacted to majorhavok's post in the thread The 5-tire PERFECT rotation schedule for MAX tread life and value. with Like.
Hello All, I had planned to upgrade to some 37''s on my 2023 Wildtrak but the economics pushed me to keep the stock 35's. $1200 out the...
-
userdude replied to the thread Diff Drop with 37s - Have you had any problems with your CV axles.Oh! I thought it was a tribal region in Pakistan. (y)
-
userdude reacted to SierraBronco's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Haha.
It’s an axle, not my favorite underwear
-
userdude reacted to SierraBronco's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Like.
That’s like accessorizing without getting aftermarket wheels. Nobody can see the UFDU. It’s a silly accessory.
-
userdude replied to the thread Diff Drop with 37s - Have you had any problems with your CV axles.if you don't paint it hot pink and dazzle it with some rhinestones, they won't. Just sayin'!
-
userdude reacted to SierraBronco's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Like.
He is very thorough. He’d never worked with the 32 spline axles or UFDU so I had to send him the axles and he tore them apart for angle...
-
userdude reacted to 87-Z28's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Haha.
Not really. Both our plots achieve the same level of understanding by the viewer. Just to be clear. There is a general acceptance that...
-
userdude reacted to 87-Z28's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Like.
For OEM style CVs, the axles are free to move (not restrained) along their axis (longitudinally). This allows for some misalignment...
-
userdude replied to the thread Diff Drop with 37s - Have you had any problems with your CV axles.My plots came out different. 🤔
-
-
userdude reacted to 87-Z28's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Like.
A diff drop doesn’t really maintain oem geometry. It only helps improve CV half shaft angles at full shock extended length. I would keep...
-
userdude replied to the thread 2-Dr Center Console Organizer.I have a 23 2dr. I bought one that looks very similar to the ones in the screenshot above (they're probably all from the same factory)...
-
I've been slowly building this Bronco over the past couple of years, changing and upgrading parts as I've learned what works best on the... -
userdude replied to the thread 35x11.5 on a Sasquatch – Bigger or Smaller? I finally have my answer….38x11.5 if I've got the cojones to do a lift with all the fixin's!!
-
userdude reacted to Sundy's post in the thread 35x11.5 on a Sasquatch – Bigger or Smaller? I finally have my answer… with Like.
A while back I made a post asking whether a 35x11.5 would actually look smaller on a Sasquatch. Got a ton of replies and really...
-
userdude replied to the thread Bronco Raptor vs. Defender Octa vs. Wrangler 392 - Which Is the Top Dog Off-Road SUV? -- TFL review.Didn't Lambo have a $200k 4x4?
