Poke with Squatch flares and 0mm offset - pics?

[Clearwater native]

The Black ones look awesome and perfect on your Red Bronco!

Sponsored

 

[Etienne]

Replaced the +33mm OEM Sasquatch wheels with a +10mm set-up. This 23mm more negative (moving wheel more away from vehicle) offset was just under an inch outward.

Used a 18x9 wheel with a 325/65/18 (Almost exact same rolling diameter just .02" taller than stock Goodyears 315/70/17). The actual treads that touch the ground just fit inside of fender where the bulge of the rest of the tire pokes slightly.

 

[Etienne]

The Nitto Ridge Grapplers are available in 315/70 R17 and
The ones I ordered are 35X12.50 R17 they are a little bit taller and wider (true 35" tires)

The Nitto Ridge Grapplers are available in 315/70 R17 and
The ones I ordered are 35X12.50 R17 they are a little bit taller and wider (true 35" tires)

Clearwater Native - Nice looking rig! Yeah I heard the same from Discount Tires on the stock Goodyears and experienced the same 'rock throws' from the treads before going with the same Nittos...

 

[Itchysquatch]

How are you guys getting your Sasquatch flares (for those non-squatched)? Just through the dealers, or some other source (thanks in advance)?

 

[BroncoZ13]

New kicks for the Badlands today. Pics after install at Discount Tire in Leander, TX.

tires - Nitto Ridge Grappler 35x12.50R17
Wheels - KMC “Summit” 17x8.5 +18 offset

Slight more offset than factory +30 Sasquatch wheels, but def like the treads on the Nitto. Just a hair of a “poke” outside fender without the concerns for throwing rocks against body.

The factory Goodyears are a little softer ride vs the E rated Nitto, but highway noise I think is identical.

love the blacked out look with the Shadow Black exterior! Thanks for checking out!

 

[Ajtexas]

New kicks for the Badlands today. Pics after install at Discount Tire in Leander, TX.

tires - Nitto Ridge Grappler 35x12.50R17
Wheels - KMC “Summit” 17x8.5 +18 offset

Slight more offset than factory +30 Sasquatch wheels, but def like the treads on the Nitto. Just a hair of a “poke” outside fender without the concerns for throwing rocks against body.

The factory Goodyears are a little softer ride vs the E rated Nitto, but highway noise I think is identical.

love the blacked out look with the Shadow Black exterior! Thanks for checking out!

Sas or non-Sas fenders?

 

[BroncoZ13]

Sas or non-Sas fenders?

These are SAS flares

 

[Grnbronco2]

Here are the Method double standards 17x8.5 in a 0 offset on my wife’s FE.

What's the backspacing on these wheels?

 

[2fast4u]

More photos, the better in this thread

 

[Badassbronco]

Here are the Method double standards 17x8.5 in a 0 offset on my wife’s FE.

Looks great. That’s how mine looks with 35mm spacers.

 

[WOW]

I just fitted a set of RRW 17” with O offset, which is about 30mm more proud (outward) of stock. I think looks perfect. A more aggressive stance but not overt or poking out too much.
Additional bonus was 8.75lbs lighter per wheel.

William
Santa Cruz,Ca

 

[NoloBronco]

Does anyone have a Squatch that they have replaced the oem +30 mm offset wheels with a 0 offset and retained 35 inch tires. I realize the wheels/tires will be pushed out 30 mm but am curios to know what the poke looks like. Any front on pics that could show it? Thanks in advance

Squatch wheels with a 1” spacer. Close to 0 offset but not quite there.

 

[NC Bronco]

Love the RRW wheels. Went with the rr5-h 17X8.5 0 offset in gloss bronze

Sponsored