The Official Bronco6G Photo Challenge Game 📸 🤳

[Oldhippie]

My best interior upgrade is the stereo and Gmrs upgrades ya can’t see…along with the weatherstrip around the top panels…more rock and roll + communication with less wind noise!

Sponsored

 

[Returntothefog]

My best interior mod so far is attaching Velcro sheet to the roof sound deafening of the painted top to attach patches to!

 

[Beach_Bum]

My best interior mod so far is attaching Velcro sheet to the roof sound deafening of the painted top to attach patches to!

Love to see another who's in the Patch Club.

 

[Beach_Bum]

...
NEW CHALLENGE:
A photo of your best interior modification?
...

There are others that get more use and are more functional. But for me the best interior modification is the Bird's Nest. Not just for it's functionality, but what it represents. A nod to one of the most important persons on B6G at the time of launch - Miss Ashley. Only because of Ford's obstinate reluctance to share information that we were all clamoring for, we had our own internal messenger(The Stig) to convey what we were seeking.

 

[Felix808]

I'm going to have to say lights. Now I can see what's going on in there when I open the door. And we all know how much people love lights .

 

[RedDawg]

As close to an interior mod as I have.
IYKYK

 

[dpAtlanta]

We had three people with 8 likes.
THIRD place goes to @Big Norwegian with the most useful mod for a two door.
SECOND place goes to @Felix808 for the ingenious lighting.
FIRST place goes to @Beach_Bum with the nod to Miss Ashley and the Stig relating to the history behind the Bird's Nest... Well done my Friend...!!!

Take it away Ken, the next Challenge is all yours.

 

[Felix808]

SECOND place goes to @Felix808 for the ingenious lighting.

Well no genius on my part, it's IAG's kit and was well worth it. Lights come on w/door open and I have on demand when powered via an upfitter switch

 

[Beach_Bum]

...
FIRST place goes to @Beach_Bum with the nod to Miss Ashley and the Stig relating to the history behind the Bird's Nest... Well done my Friend...!!!

Take it away Ken, the next Challenge is all yours.

I don't think this has been done (too bad if it has ). But show your Bronco Carnage. Maybe you finally caught a rock with your windshield, forgot to close your soft-top pulling into your garage, kicked up stones with your OEM Rock Slingers, left all the paint on your skids on rocks, hopped a curb in the Starbies drive-thru, etc.

 

[Felix808]

Not a lot to report really. I squashed the center gusset on on rock rail by rolling a giant boulder down the Dusy-Ershim Trail. Adam @GoatFab replaced the set under their replacement warranty . Overheated steering rack on the same trip. Then I have a bashed up ICON front skid, since replaced. The biggest dent in it was from a spotter on Cliffhanger that dropped me The passenger rear door dent / scuff was a souvenir from cliffhanger as well but was my own doing

 

[Beach_Bum]

Not a lot to report really. I squashed the center gusset on on rock rail by rolling a giant boulder down the Dusy-Ershim Trail. Adam @GoatFab replaced the set under their replacement warranty . Overheated steering rack on the same trip. Then I have a bashed up ICON front skid, since replaced. The biggest dent in it was from a spotter on Cliffhanger that dropped me The passenger rear door dent / scuff was a souvenir from cliffhanger as well but was my own doing

Dang. Starting off the challenge strong...

 

[Felix808]

Dang. Starting off the challenge strong...

It's all pretty minor really. Aluminum is not optimal material for a skid plate or rock rail, but It is designed to bolt to my bumper and tie in more frame and cross member support and work as a system. To it's defense, it's seen a lot of challenging trails

 

[dpAtlanta]

But show your Bronco Carnage.

My "carnage" is minimal to others I have seen here.
My first trip to Windrock ORV park damaged all four of the bead-lock capable trim rings.
Here are the two worst:

I figured these weren't that expensive... I went to the local Ford dealer and asked if they had the trim rings in stock, or if they needed to order them. They said nobody has ever asked for them, but they would check.
They said the entire rim with the trim ring was $750.00, and just the trim ring alone was $500.00 - EACH...!
That's $2000.00 for all four OEM silver rings... you can buy after market for much less.
I found someone who was selling all 5 of his OEM trim rings for $250.00 on Facebook Marketplace locally... score!
Next time I go Off-Roading, I'll just switch to the originals with the "off-road rash".

 

[Felix808]

My "carnage" is minimal to others I have seen here.
My first trip to Windrock ORV park damaged all four of the bead-lock capable trim rings.

Wow, I didn't even think about those. They all pretty much look like this except for the spare, it's still shinny new. Not going to win any Show & Shine events here

 

[dpAtlanta]

Wow, I didn't even think about those. They all pretty much look like this except for the spare, it's still shinny new. Not going to win any Show & Shine events here

Wow... just Wow!!!

[Dave quietly steps back and thinks about deleting his pictures as he looks like a whining little twit with a "look at my little scratches, there Soooooo bad, feel sorry for me attitude."]

You da Man @Felix808... and Thanks for your Service!

Sponsored