- First Name
- Shane
- Joined
- Dec 6, 2024
- Threads
- 14
- Messages
- 50
- Reaction score
- 30
- Location
- Winston Salem NC
- Vehicle(s)
- 2024 Bronco Black Diamond 2 door
- Your Bronco Model
- Black Diamond
- Thread starter
- #1
I was able to get the led to work without having to mess with the Bcm. I purchased 2 headlight adapters from starkey and used the taillight wire from the harness and ran it to pin 5 on the rear taillight harness.
I had to do a couple Forscan changes and unfortunately the brake light will still blink when your turn signal is on. I have tried everything to get that to stop but they work. I also did the anti flicker line in Forscan, they flickered when the engine was running. I do get a quick hyper flash when the brake is pushed and you hit the turn signal but it goes away.
I included 2 short videos.
I had to do a couple Forscan changes and unfortunately the brake light will still blink when your turn signal is on. I have tried everything to get that to stop but they work. I also did the anti flicker line in Forscan, they flickered when the engine was running. I do get a quick hyper flash when the brake is pushed and you hit the turn signal but it goes away.
I included 2 short videos.
Sponsored
