【Mabett】 not concepts, they will be coming, cargo trunk hooks, cargo trunk organizer, mud flaps for all unaltered bronco

[Cfield90]

Oh the 4dr window buttons are up there? I didn't consider that. Ideally the cupholders would be exactly where it says no step - where AC vents should be too.

Yes on the 4 door placement of the switches, but for the 2-door makes a ton more sense to have them hanging…unless the power outlets are there?

Sponsored

 

[ATbronco]

I have factory steps now too- dealer installed- I was skeptical because Ford says they won’t work together- but the mud flaps fit just fine with them.

can you explain more? I thought the $50 mud flaps didnt work with factory side steps?

 

[BurtMacklin]

can you explain more? I thought the $50 mud flaps didnt work with factory side steps?

On the Ford site it says they don't, but my dealer had no problem at all. They installed the mud flaps first, and the steps came in a couple weeks later. There doesn't seem to be any issue with rubbing or anything.

 

[BroncoATX21]

Something like the picture for the above visor storage

 

[NevadaDesertExploration]

Wake up we need mud flap answers!

 

[BroncoATX21]

If you can make a larger enclosure that fills the whole area it would be the best.

Another idea for a best seller, if you could make a double cup holder over mold that fits over the console where it says "no step". You'll sell one to every owner.

 

[Mabett]

Something like the picture for the above visor storage

can you send me the link

 

[Mabett]

Wake up we need mud flap answers!

still building molds

 

[Tricky Dick]

Exactly this!

 

[Tricky Dick]

can you send me the link

https://www.amazon.com/Vertically-D...id=1650344031&sprefix=31700+vd,aps,427&sr=8-2

 

[BroncoATX21]

can you send me the link

VDP 31700 Overhead Shelf https://www.amazon.com/dp/B00U10ADMY/ref=cm_sw_r_cp_api_i_CBG7R6RJXN471YACKJQD

This one is designed for the wrangler, but I think something very similar would be doable for the Bronco. Plus, a piece that goes over the overhead console with the aux switches/map lights would add stability that would take stress off of any adhesive.

 

[Mabett]

https://www.amazon.com/Vertically-Driven-Products-31700-Overhead/dp/B00U10ADMY/ref=mp_s_a_1_2?crid=3JD6OL4O25B11&keywords=31700+vdp&qid=1650344031&sprefix=31700+vd,aps,427&sr=8-2

Thank you

 

[Mabett]

VDP 31700 Overhead Shelf https://www.amazon.com/dp/B00U10ADMY/ref=cm_sw_r_cp_api_i_CBG7R6RJXN471YACKJQD

This one is designed for the wrangler, but I think something very similar would be doable for the Bronco. Plus, a piece that goes over the overhead console with the aux switches/map lights would add stability that would take stress off of any adhesive.

Thank you

 

[Padawan]

Cargo Trunk Hooks

I designed it into two states, you can have one more hook on each side, the horizontal hook is fixed, and it is equipped with a portrait hook at the same time, anyone can change its state according to their own ideas, bolt directly to pre-existing holes on the rear roll bar of the Bronco

Cargo Trunk Organizer

The first one is an organizer under the floor in the back, in my opinion it doesn't do much, it's just for better cleanup, or to be able to take out all the items inside at once, anyway, I've decided to finish it, but your feedback decides whether I should sell or not

The second one is the Organizer hanging on the left and right sides, it increases some space, it consists of two parts, a mounting base + a storage box, so that it can be easily removed without affecting other functions, I have not yet Deciding whether to do it or not is just an idea of mine at the moment, maybe meaningless

Mud Flaps for All Unaltered Bronco (includes anyone with Front Rock rails or Front Steps, except Bronco with Sasquatch™ Package, but i have already plan to make mud flaps for Bronco who has Sasquatch™ Package, just need to scan Bronco who has Sasquatch™ Package)

This is probably nothing to talk about, many people want do not any modification to mud flaps to match everyone who has OEM Front Rock rails or Front Steps, and without breaking anywhere in the body, use brackets to create it mounting hole

The above three products are all models made by me, not finished products

Thanks to Cat for making "Mabett For Bronco Design Sheet" for me

I didn't waste this work and updated my design for Bronco in the form and will continue to update and check your suggestions

Forum members can add ideas, and i will provide comments and status.

Fill in your product ideas here, it will be possible to realize

Any way to make the rear trunk side organizers with Molle mounts or layered so to attach things?

 

[Mabett]

Any way to make the rear trunk side organizers with Molle mounts or layered so to attach things?

I am doing some molle panel for trunk

Sponsored