First coat of MAXL ONE (all-in-one waterless wash, polish, ceramic-style protective spray) on 60th Anniversary Bronco

[Lej512]

It’s a lot of work for an old, fat guy but I got the first coat of MAXLONE applied. I really like their product.

Sponsored

 

[Felix808]

Looks great!
It's too late for mine & too much effort

 

[Lej512]

Looks great!
It's too late for mine & too much effort

I’ve never liked waxing. Talk about too much effort. I would pay someone before I did it myself. I hate it that much. This is the least aggravating process I’ve found and I’m very please with the results. If I wasn’t so tired, I’d do a second coat today.

 

[Felix808]

Now that I actually looked up the product

, it looks very similar to Topcoat F11 that I use on most my bikes & a certain car.

Again looks great

 

[d.horne]

I’ve never liked waxing. Talk about too much effort. I would pay someone before I did it myself. I hate it that much. This is the least aggravating process I’ve found and I’m very please with the results. If I wasn’t so tired, I’d do a second coat today.

I've been using this product for almost 2 months and with each application the process gets easier , today it took about 40 minutes and most of that was bugs on the windshield and headlights. PS: HUNDREDS OF USES INSIDE THE HOUSE ALSO...

 

[Maxwellianation]

I find MAXLONE much easier than washing. It’s the primary way I clean my 2024 Badlands. Occasionally, soap and water to knock off mud but never with a rag. My paint looks like it’s fresh off the showroom floor. MAXLONE also gets the grime off of the fender flares.

 

[dejones64]

Oooof, love that red!

 

[GRNMACHINE]

I have mainly used Meguiar's products and some of the Griots stuff. That looks amazing!! Never heard of this stuff, will be checking it out. I have only hand waxed all my vehicles over the years, some buffing/polishing with an orbital from Griots. And I may be partial to the color, wasnt my first choice but it is really starting to grow on me. Never had a red vehicle before, this metallic is deep and shiny. Beautiful 60th anniversary you have!!

 

[RR25HB]

I find MAXLONE much easier than washing. It’s the primary way I clean my 2024 Badlands. Occasionally, soap and water to knock off mud but never with a rag. My paint looks like it’s fresh off the showroom floor. MAXLONE also gets the grime off of the fender flares.

Fender flares are tough to get mud stains off of.

 

[CalvinT]

Project Farm gave Cerakote ceramic trim coat high marks for restoring trim

 

[Bigtopher]

It’s a lot of work for an old, fat guy but I got the first coat of MAXLONE applied. I really like their product.

Looks great! May have to find a bottle. Definitely thinking about sanding and painting my stock flares at some point for ease of cleaning as time goes on.
Don't mind my dumb wave if I see you around Glens Falls.

 

[Lej512]

Looks great! May have to find a bottle. Definitely thinking about sanding and painting my stock flares at some point for ease of cleaning as time goes on.
Don't mind my dumb wave if I see you around Glens Falls.

A friendly wave I can handle. A dash full of plastic ducks, not so much.

 

[RR25HB]

A friendly wave I can handle. A dash full of plastic ducks, not so much.

 

[MickeyT]

First off, your Bronco is stunning! Such a captivating red…especially when it’s so clean and shiny.

I’ve had my eye on this product for a bit, honestly, because the internet spies have decided I must “need” it and keep pushing it my way every time I get online.

What makes the process such a PITA? The ads (misleading, of course) make it look so simple: just spray and wipe.

 

[Bevans86]

It’s a lot of work for an old, fat guy but I got the first coat of MAXLONE applied. I really like their product.

MaxLone is good stuff but for those thinking about using it. My only advise is don't use a lot. A little goes a long way and if you use too much its such a pain

Sponsored