2dr Door & MIC rear cap dimensions?

[Tychapman]

Hello all,

While I wait idly by for my bronco to arrive one of these years, I want to draw up some garage wall mounting options for my various bronco sheddings in CAD.

I've looked around and haven't been successful in finding any LxWxH dimensions for the doors and MIC rear cap (the front portion of the roof would be helpful as well).

Does anyone have a spec sheet handy that actually includes this info? Or maybe one lucky guy/gal already has a 2 door and could whip out the measuring tape for little old me!

Thanks!

Sponsored

 

[BudgetBronco]

Ha, I missed this and just separately posted a similar question. If I get an answer I will cross reference it here

 

[Tychapman]

Ha, I missed this and just separately posted a similar question. If I get an answer I will cross reference it here

Oops! I'll do the same.

 

[Tychapman]

I'm hoping someone with a unicorn (ie: 2dr bronco) can come through for me one of these days!

 

[BudgetBronco]

Until we have actual measurements, we can use the estimates from this post for the doors:
https://thebronconation.com/forums/threads/2-door-cargo-dimensions-with-seats-down.3122/

 

[Tychapman]

Until we have actual measurements, we can use the estimates from this post for the doors:
https://thebronconation.com/forums/threads/2-door-cargo-dimensions-with-seats-down.3122/

That's definitely a start! Thank you!

 

[Boxer4]

* UPDATED 7-26-21 ROOF OFF measurements

These are 2 door measurements.

Door on truck numbers-
48 1/2" wide x 31" high to the window belt gasket. Add about 2" in height for the kick up at the door pillar. Thickness is about 9" ( Exterior handle, interior panel, etc )

Front roof panels-
Driver - 32 3/4" front to back x 28 1/2" wide x 5" deep
* Passenger - 32 3/4" front to back x 31 " wide x 5" deep ( includes gasket )

* Back roof shell section-
Ford Recommends to keep the back Glass up during storage.
So-
Overall length at the top of the shell -front to back is 72" gasket to gasket ( window open )
and is 51 " at mounting flange.

Side to side width is 63"

Total height is 26" with 22" if the back glass is closed.
Regarding the height, there are 4 locating pins ( about 2" long that are mounted on the bottom of the shell's flange. They are included in these heights.

Take these as rough dimensions.
Do you plan to post CAD details?

Sponsored