- First Name
- Sean
- Joined
- Sep 27, 2020
- Threads
- 19
- Messages
- 779
- Reaction score
- 2,006
- Location
- San Francisco
- Website
- www.serramonteford.com
- Vehicle(s)
- '21 Ford Bronco Big Bend, '03 BMW Z4
- Your Bronco Model
- Big Bend
- Thread starter
- #1
Hey all,
I'm looking at getting some Sasquatch wheels with no tires, will there be any fitment issues with the stock BB tire? The wheel is 1" wider.
Specs on Tire are 255/75R17
Specs on Stock Wheel are 17x7.5 ET55
Specs on Squatch Wheel are 17x8.5 ET30
Mainly I want to make sure that I don't have any poke beyond the flares. By my calculations the wheel face will be about 38 mm further out from the hub than the stockers.
Check my math:
Stock Wheel width=190.5, hub to face (190.5/2)-55=40.25
Squatch Wheel Width=216, hub to face (216/2)-30=78
78-40.25=37.75mm further out
The other thing is will this tire have any issues since I'll be stretching them 1" over stock, I assume it will be fine, but want to hear any negatives on this setup regarding light offroading.
I'm looking at getting some Sasquatch wheels with no tires, will there be any fitment issues with the stock BB tire? The wheel is 1" wider.
Specs on Tire are 255/75R17
Specs on Stock Wheel are 17x7.5 ET55
Specs on Squatch Wheel are 17x8.5 ET30
Mainly I want to make sure that I don't have any poke beyond the flares. By my calculations the wheel face will be about 38 mm further out from the hub than the stockers.
Check my math:
Stock Wheel width=190.5, hub to face (190.5/2)-55=40.25
Squatch Wheel Width=216, hub to face (216/2)-30=78
78-40.25=37.75mm further out
The other thing is will this tire have any issues since I'll be stretching them 1" over stock, I assume it will be fine, but want to hear any negatives on this setup regarding light offroading.
Sponsored