Anyone have pinout for the connector on the back of the mirror?

[Bellime]

Anyone out there have the pinout for the connector on the back of the mirror.

I think the following-
pin 5 (Black) negative
Pin 8 (white) Accessory power - 12vdc
pin 16 (green)

Sponsored

 

[RagnarKon]

Pins numbers are all messed up, but good guess otherwise.

• Pin 1 (White) - 12 VDC from the fuse panel under the steering wheel
• Pin 4 (Black/Blue) - Ground
• Pin 9 (Green/Brown) - Dimming control

 

[Dog]

Anyone out there have the pinout for the connector on the back of the mirror.

I think the following-
pin 5 (Black) negative
Pin 8 (white) Accessory power - 12vdc
pin 16 (green)

Just FYI, not sure what you are wanting to do, but if you are looking for switched power to run off the mirror harness, I highly recommend this. Plug and play, super easy. I use it to power my V-1 from the mirror:

https://www.amazon.com/dp/B088P4VFQ7?psc=1&ref=ppx_yo2ov_dt_b_product_details

.

 

[Bellime]

Nice to know but I am replacing the mirror.

 

[Bellime]

I am also replacing the mirror

 

[ArizonaGreg]

Just FYI, not sure what you are wanting to do, but if you are looking for switched power to run off the mirror harness, I highly recommend this. Plug and play, super easy. I use it to power my V-1 from the mirror:

https://www.amazon.com/dp/B088P4VFQ7?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

[ArizonaGreg]

This is why I follow these topics!
I have been planning to install a dashcam and HATE dangling wires. My thought was to tap off a wire to the mirror but I was unsure of the details of how to best do that. Now I don't have to think about it anymore. What a great solution. Not sure how you found this but glad you did.

THANK YOU for posting this!

Sponsored