- First Name
- Bob
- Joined
- Jul 1, 2021
- Threads
- 4
- Messages
- 696
- Reaction score
- 1,357
- Location
- Somewhere in time and space
- Vehicle(s)
- 02 4x4 ranger, '17 edge 2022 Bronco
- Your Bronco Model
- Base
I went back a little further...
Sponsored
Got them off ebay. They are OEM Ford Fender badges. Got super lucky with these as they were practically, if not, new. I can't remember what the listing said but perfect condition with no scratches or marks. Love them!badass! Are those the Dennis carpenter badges?
I have these (blue field). I used an epoxy to level the back of the badge's voids and have applied 3M adhesive tape. But I'm unsure if it is adequate to withstand the added weight of the epoxy along with the metal. Plenty of adhesive tape in the rectangle field, but there is very little on the smaller script letters.I went back a little further...
All metal, nos...I have these (blue field). I used an epoxy to level the back of the badge's voids and have applied 3M adhesive tape. But I'm unsure if it is adequate to withstand the added weight of the epoxy along with the metal. Plenty of adhesive tape in the rectangle field, but there is very little on the smaller script letters.
I have no problem with the phrase "Sport" on my Bronco. I've seen some of the acrylic badging and they look cheap.
? Yes, my badge is the same as yours just with the blue field. It is all metal (removed the metal posts for mounting on the EB fender). But didn't you add epoxy to level out the voids? I was afraid that not enough contact would be made with the adhesive tape and the fenders surface without bringing the adhesive tape flush with the badge's back.All metal, nos...
No I used the spongy tape to avoid some of the body curves. Worked out well.? Yes, my badge is the same as yours just with the blue field. It is all metal (removed the metal posts for mounting on the EB fender). But didn't you add epoxy to level out the voids? I was afraid that not enough contact would be made with the adhesive tape and the fenders surface without bringing the adhesive tape flush with the badge's back.
Love this badge. can you share where you go this?
https://www.ebay.com/itm/1837613014...47_YD_2RhO&var=&widget_ver=artemis&media=COPYLove this badge. can you share where you go this?