Badlands NON-SASQUATCH on 35's and 1" level lift

[UNBROKN]

Here's the Kenda 35 x 10.50s on BL stock wheels & suspension. They measure 34.8" @ 35psi.

Love 'em so far...super quiet on the highway.

NICE!!!! I think I might go with these!!

Sponsored

 

[BroncoAZ]

Here's the Kenda 35 x 10.50s on BL stock wheels & suspension. They measure 34.8" @ 35psi.

Love 'em so far...super quiet on the highway.

Those Kenda’s look great, I just couldn’t do the weight penalty at 66.62 pounds each.

 

[PWillette]

Those Kenda’s look great, I just couldn’t do the weight penalty at 66.62 pounds each.

Thanks man! By scale they're actually closer to 68lbs each...certainly heavier than the "C" rated tires but less than most "E" rated. FWIW, with the 4.70 gears I didn't notice any difference from the stock 285/70 KO2s.

 

[BroncoAZ]

Mine needs the leveling kit to look right. I just installed the 285/75R17 Toyo OC3 on Method 705 +35mm.

 

[Joemama]

Yes Sir, I did the same thing. Zone Offroad 1" level kit and a few other things.....

did you just do the front 1" leveling kit or 1" on all four tires?

 

[Raptor72]

did you just do the front 1" leveling kit or 1" on all four tires?

Just a 1” level(front).

 

[Bronco56]

Im not interested in pulling crash bars, I am old and I'd rather have those vs. the biggest tire possible.
How big can you go with the RC 1" lift without pulling?
I was just wanting to run 34x12's with a little wider offset wheel to have a little wider stance.

 

[peterh]

Mine needs the leveling kit to look right. I just installed the 285/75R17 Toyo OC3 on Method 705 +35mm.

looks terrific - would love to see some straight on and rear shots showing the poke factor if you have them - poke looks minimal and that's what i am going for as well

 

[BroncoAZ]

looks terrific - would love to see some straight on and rear shots showing the poke factor if you have them - poke looks minimal and that's what i am going for as well

Thanks! Poke on this setup is exactly what I wanted, the tread is covered but the sidewalls poke out. Wheels are Method 705 17x8.5 +35mm, tires are Toyo OC3 in 285/75R17.

 

[BroncoAZ]

Im not interested in pulling crash bars, I am old and I'd rather have those vs. the biggest tire possible.
How big can you go with the RC 1" lift without pulling?
I was just wanting to run 34x12's with a little wider offset wheel to have a little wider stance.

My setup fits with the crash bars. The tires are marked 34”x11.5”.

 

[peterh]

Thanks! Poke on this setup is exactly what I wanted, the tread is covered but the sidewalls poke out. Wheels are Method 705 17x8.5 +35mm, tires are Toyo OC3 in 285/75R17.

Thank you sir! looks amazing!

 

[Alpha1_Silverback]

315/70/17 no lift. 1.5” wheel spacers.

 

[Geneblakeney]

I like the look, I think it will be a good winter tire option too. Curious if I can fit it on the stock wheel with crash bars. My local tire dealer is pretty cool, they will likely test fit them for me. So far the 33s have been able to hang pretty well Most of my time off road has been with a mix of Broncos, from bone stock base models to custom 2drs with 37s.

 

[Geneblakeney]

35 bfg mud terrain. 35 x 12.5 r17. 2” level.

 

[Geneblakeney]

One more

Sponsored