- Thread starter
- #1
Not sure if this has been shared here yet but search didn't show any results. But I've been waiting for this:
VIDEO
And here's the official press release description copied from this thread:
https://www.bronco6g.com/forum/threads/revealed-custom-build-broncos-to-debut-at-sema-2021.26347/
2021 Bronco by BDS Suspensionsā
Long-time Ford builder BDS Suspensions, a subsidiary of Fox Shocks, created an off-road first responder vehicle based on a 2021 two-door Black Diamondā¢ series Bronco. With nearly a half-century of suspension experience, BDS Suspensionsā creation is outfitted as the ultimate fire truck, featuring equipment inside and out to help rescue crews take on the trails.
The ultra-capable vehicle is equipped with a BDS 4-inch UCA System with Fox 2.5 PES coilovers, BDS rear adjustable control arms and track bar, swaybar disconnect and 37-inch BFGoodrichĀ® KM3ā¢ tires.
CrawlTek Revolution bumpers include recessed winch mount, recovery hooks and belly skid up front, plus winch mount and recovery hooks in back. Both winches are WARN Industries ZEONĀ® 10s units. Other updates include a modified half-truck hardtop, CrawlTek slider steps, a CargoGlide custom CG1000XL slideout tray and ARBĀ® TwinAir underhood air compressor.
VIDEO
And here's the official press release description copied from this thread:
https://www.bronco6g.com/forum/threads/revealed-custom-build-broncos-to-debut-at-sema-2021.26347/
2021 Bronco by BDS Suspensionsā
Long-time Ford builder BDS Suspensions, a subsidiary of Fox Shocks, created an off-road first responder vehicle based on a 2021 two-door Black Diamondā¢ series Bronco. With nearly a half-century of suspension experience, BDS Suspensionsā creation is outfitted as the ultimate fire truck, featuring equipment inside and out to help rescue crews take on the trails.
The ultra-capable vehicle is equipped with a BDS 4-inch UCA System with Fox 2.5 PES coilovers, BDS rear adjustable control arms and track bar, swaybar disconnect and 37-inch BFGoodrichĀ® KM3ā¢ tires.
CrawlTek Revolution bumpers include recessed winch mount, recovery hooks and belly skid up front, plus winch mount and recovery hooks in back. Both winches are WARN Industries ZEONĀ® 10s units. Other updates include a modified half-truck hardtop, CrawlTek slider steps, a CargoGlide custom CG1000XL slideout tray and ARBĀ® TwinAir underhood air compressor.
Sponsored
Last edited by a moderator: