Can I mount 37 inch tires (BFG KO2) on Badlands OEM Sasquatch wheels?

[Tomskullz]

I know it’s been spoken about in several threads. I’ve search and still there’s no definite answer, please can someone help out ?
I have a Badlands Sasquatch on a 3 inch BDS lift. Can I use a set of BF Goodrich ko2 37 12.50 17 tires on OEM Sasquatch wheels. Some people say yes and forget to mention that they’re running spacers.
please help thank you !

Sponsored

 

[Bmadda]

Yes, but do yourself a favor and install the jks big tire kit 1st, if you haven't already. I have spacers, but, I won't need them anymore after doing that. I just trimmed as needed w/a Sawzall.

 

[HeliPilot]

Yes, but do as stated above. JKS and spacers!!!!

 

[One who waits long time]

Yes, but do as stated above. JKS and spacers!!!!

 

[One who waits long time]

I ran 37 KO2s before the 2 inch levelling kit on my sasquatch badlands with very little rubbing. Tires were spaced out only by the bead locks. I haven't noticed them rubbing at all with the levelling kit.

 

[Texasgrillchef]

Yes you can

i went with 2" perch collars and 1.25" wheel spacers and have no issues

 

[Pickle74]

I ran 37 KO2s before the 2 inch levelling kit on my sasquatch badlands with very little rubbing. Tires were spaced out only by the bead locks. I haven't noticed them rubbing at all with the levelling kit.

I'm debating the 37 bfg ko2 on my BB SAS, running kbd fender flares, thoughts?

 

[Pickle74]

I'm debating the 37 bfg ko2 on my BB SAS, running kbd fender flares, thoughts?

Also has 1.5" front lift and 1/2 rear lift

 

[NORCALGXP]

I ran 37s with about the same lift on my stock SAS rims only needed 1 inch bora wheel spacers. Perfect set up till I purchased new rim. Your good to go with your set.

 

[Pickle74]

I ran 37s with about the same lift on my stock SAS rims only needed 1 inch bora wheel spacers. Perfect set up till I purchased new rim. Your good to go with your set.

Another dumb question. The 37 KO2s are actually 36.5 and only 6 lbs heavier than factory sasquatch tires, will I have to get tailgate reinforcement and spare relocation kit? Just want to make sure I have everything I need.

 

[Tomskullz]

I originally mounted bfGoodrich 37x 12.50 17 on oem Sasquatch wheels. I used 1 inch spacers all around no rubbing. No spare tire support.
Now I have a BDS lift kit running 22X12 -44 offset on 37X13.50 22 hybrid tire.
No spare tire support, I did have to trim some of the inner wheel liner and removed a plastic liner support.

 

[MNBigfoot]

Another dumb question. The 37 KO2s are actually 36.5 and only 6 lbs heavier than factory sasquatch tires, will I have to get tailgate reinforcement and spare relocation kit? Just want to make sure I have everything I need.

I believe, Sas tires weigh 52 lbs, while 37/12.5/17 KO's are 65-71 lbs

Sponsored