Driving/fog lights question

[Rickap7]

I have a 25 Big Bend with standard bumper no fog lights. I want to add fog light to bumper. I want to be able to have them work like they where factory installed what do I need to do? I know I will have to purchase a new OEM light switch with driving light button. but what else do I need? Do they sell a wiring harness that will allow the use of factory light switch w/driving light option?

Sponsored

 

[4x4TruckLEDs.com]

You don't have fog light wiring sadly there. I don't even know if you can add it easily to be honest. Unlike the trucks with mod bumpers, that have a hidden pigtail (sometimes). The base trucks with plastic bumpers and no fogs have no wiring at all there.

You CAN add fogs if you get the OEM fog light brackets from Ford and then an aftermarket fog kit. But you'd need to wire it to a switch

 

[Brian_B]

This thread may not have quite everything but should be a good read

https://bronco6g.com/forum/threads/...ded-and-connected-to-factory-connector.40448/

 

[Haykayy]

This thread may not have quite everything but should be a good read

https://bronco6g.com/forum/threads/...ded-and-connected-to-factory-connector.40448/

Thanks for this link, I've been trying to find it for a while now.

 

[Motovita]

You don't have fog light wiring sadly there. I don't even know if you can add it easily to be honest. Unlike the trucks with mod bumpers, that have a hidden pigtail (sometimes). The base trucks with plastic bumpers and no fogs have no wiring at all there.

You CAN add fogs if you get the OEM fog light brackets from Ford and then an aftermarket fog kit. But you'd need to wire it to a switch

My Badlands came with the Modular bumper. Where should I look for the hidden pigtail?

 

[4x4TruckLEDs.com]

My Badlands came with the Modular bumper. Where should I look for the hidden pigtail?

If it's a 2025 it won't be there. 2024 and earlier look behind the plastic cover around the front tow hook. It'll be under the tow hook

 

[4x4TruckLEDs.com]

Welcome to the jungle

Watch it bring it to your n-n-n-n-n-n-n-n knees, knees

 

[Motovita]

If it's a 2025 it won't be there. 2024 and earlier look behind the plastic cover around the front tow hook. It'll be under the tow hook

Thanks, you saved me some searching time. What I think I need is a single fog/visibility light to mount roughly centered in the opening of the modular bumper. My state requires a front license plate and I plan to mount the plate where it would partially block the inboard light on any of the multi light setups I've seen for that bumper.

 

[4x4TruckLEDs.com]

Thanks, you saved me some searching time. What I think I need is a single fog/visibility light to mount roughly centered in the opening of the modular bumper. My state requires a front license plate and I plan to mount the plate where it would partially block the inboard light on any of the multi light setups I've seen for that bumper.

Just use our license plate bracket: https://www.4x4truckleds.com/kr-off-road-license-plate-bracket-for-2021-ford-bronco/

This way you can mount 1 2 or 3 lights per side in the fog pocket and not block anything.

Additionally you won't run the risk of blocking any parking sensors with a plate mounted to the outside of the side of your bumper.

 

[BroncoA512021]

This license plate bracket works great on the standard bumper. No drilling required License Plate Bracket

 

[Mbuck]

If you are interested, I posted a thread detailing how I installed factory fog lights in my 2025 Big Bend.

https://www.bronco6g.com/forum/threads/wiring-factory-fog-lights-in-a-2025-big-bend.126942/

Sponsored