My guess is at the minimum the white stripes are vinyl that will be available with B&PThis makes me mad. The color and old school design are what we've been asking for, but we aren't even given an option.
Sponsored
My guess is at the minimum the white stripes are vinyl that will be available with B&PThis makes me mad. The color and old school design are what we've been asking for, but we aren't even given an option.
I would imagine Ford is going to offer a few stripe kits, might get lucky. Some one on here needs to add some black and some white stripe kits to the MIC top renders to see what they would look like.This makes me mad. The color and old school design are what we've been asking for, but we aren't even given an option.
It looks like a Badlands badge, with trees instead of rocks, and Filson across the badge. Also, there is a Filson graphic/tape under that dude's hand.Is that a filson cloth half cab partition? And a filson badge under the sticky note?
Seems pretty clear in the photo the aft mount goes to the bumper. You can see the bar vertically pass by the tail light in the photoI think you’re right and that’s the most likely place. Assuming that point is strong enough. I think the bigger question is the mounting point for the rear. It seems to mount somewhere in the cargo area right behind the roll bar. If that’s the case you wouldn’t be able to use it with the soft/hard top on. Only with a Bimini top like this concept has. Seems kinda pointless to have an exoskeleton roof rack that can’t be used with a standard top ?‍?‍