Fog lights for mod bumper using factory switch?

[Jesseroop]

hey i just swtich from a cabable bumber to the mod and im looking to plug in fog lights to my factory swtich will
Diode Dynamics Deutsch DT Adapter Wires, H11/H8/H9/800/881 (Pair) and the
Diode Dynamics 6" Light Bar Fog Kit w/KR Off-Road Brackets for 2021+ Ford Bronco (HD Modular Bumper)
work on the factory fog light switch.

Sponsored

 

[BroncoDave24]

Did your original bumper have the Parking Sensors in it? If not, You don't have the complete wiring harness to use the factory fog switch. It can be added. There are dozens of threads on the subject.

 

[Jesseroop]

Did your original bumper have the Parking Sensors in it? If not, You don't have the complete wiring harness to use the factory fog switch. It can be added. There are dozens of threads on the subject.

I dont have the front sensors my bumber had fog lights in it i just am trying to plug back into it

 

[Headsong]

The 'in'capable bumper already has the lousy factory fogs, and yes, you can plug in the @Diode Dynamics right in and use factory switch. Changing the bumpers shouldn't matter.

 

[4x4TruckLEDs.com]

hey i just swtich from a cabable bumber to the mod and im looking to plug in fog lights to my factory swtich will
Diode Dynamics Deutsch DT Adapter Wires, H11/H8/H9/800/881 (Pair) and the
Diode Dynamics 6" Light Bar Fog Kit w/KR Off-Road Brackets for 2021+ Ford Bronco (HD Modular Bumper)
work on the factory fog light switch.

Yup those will work together and allow you to control the lights from your factory fog switch. As long as you KEPT your existing wire harness behind the old capable and moved it to the new modular bumper

 

[Tbbucs55]

I was also looking at those fog lights. Upload a picture and your install experience if you go that rout. Thanks.

 

[Jesseroop]

I was also looking at those fog lights. Upload a picture and your install experience if you go that rout. Thanks.

will do i just ordered the lightes and the pig tail for it i will share when completed

 

[Headsong]

But you don't need a pigtail since you started with 'in'Capable bumper. Plug and play.

 

[Jesseroop]

But you don't need a pigtail since you started with 'in'Capable bumper. Plug and play.

sorry still learning terms i ordered both those items you need the kit then you also need the adapter wires to plug into that harness

 

[Headsong]

The 'in'Capable bumper (my term, since it's FAR less capable than the modular that I was supposed to get, ahem. Anyway, it comes with the crap factory fogs already. So changing fogs is merely a matter of pulling the six bolts, plugging in the new @Diode Dynamics ones, fitting them in and re-installing bumper. Since you're just switching bumpers, the connection is already there.

Now, if you mean the Standard Bumper, I think it's called, which has no fogs, then you'll need pigtails...and a switch.

 

[4x4TruckLEDs.com]

I was also looking at those fog lights. Upload a picture and your install experience if you go that rout. Thanks.

It's an easy to install kit. Here are some photos from our demo truck (before we powder coated them, they are now black powder coated brackets)

A more popular kit is our triple fog kit here: https://www.4x4truckleds.com/diode-...ckets-for-2021-ford-bronco-hd-modular-bumper/

Our our dual kit here: https://www.4x4truckleds.com/diode-...ckets-for-2021-ford-bronco-hd-modular-bumper/

 

[Jesseroop]

It's an easy to install kit. Here are some photos from our demo truck (before we powder coated them, they are now black powder coated brackets)

A more popular kit is our triple fog kit here: https://www.4x4truckleds.com/diode-...ckets-for-2021-ford-bronco-hd-modular-bumper/

Our our dual kit here: https://www.4x4truckleds.com/diode-...ckets-for-2021-ford-bronco-hd-modular-bumper/

Just got them install and loving the level of light I get out of them! Though im a little lost on getting them aligned. I have them aimed on the bracket as low as it can go yet they seem to be high as I can see if shining through windshields when they pass me there is a nob that spins but doesnt seem to do anything? Picture below any suggestions

 

[4x4TruckLEDs.com]

Just got them install and loving the level of light I get out of them! Though im a little lost on getting them aligned. I have them aimed on the bracket as low as it can go yet they seem to be high as I can see if shining through windshields when they pass me there is a nob that spins but doesnt seem to do anything? Picture below any suggestions

Just pivot them down then. Also, your not tightened up all the way as I can see still see the threads on the bolt.

Just turn your headlights on and then pivot the light so it's shining below your headlights on the ground as it's acting as a "fog light" Then tighten the bolt when you get it where you want.

I'd recommend tighten it enough so that you can still pivot the light down without it losing where it's aiming then tighten it the rest of the way down.

Also, your not using the right brackets... your not supposed to use that tiny L bracket. If you bought a fog kit from us then we included a larger U Bracket which holds the light... those smaller L brackets are not used with our fog kits

 

[Jesseroop]

Just pivot them down then. Also, your not tightened up all the way as I can see still see the threads on the bolt.

Just turn your headlights on and then pivot the light so it's shining below your headlights on the ground as it's acting as a "fog light" Then tighten the bolt when you get it where you want.

I'd recommend tighten it enough so that you can still pivot the light down without it losing where it's aiming then tighten it the rest of the way down.

Also, your not using the right brackets... your not supposed to use that tiny L bracket. If you bought a fog kit from us then we included a larger U Bracket which holds the light... those smaller L brackets are not used with our fog kits

Awsome thanks for the help

Sponsored