Front License Plate Bracket Options (With Hidden Winch)

[604Bronco]

I was wondering if anyone has a good solution for the front license plate mount for Bronco’s with the modular bumper, which has a hidden winch installed? You don’t necessarily need to have a hidden winch, but this is the reason why I’m looking.

I currently have the front license plate mount from @HBTFD - which is awesome - however it will likely impact the winch when I have it installed.

I also can’t have anything that blocks the ends of the modular bumper, as I have pocket lights in these areas. I have shackles on my Bronco too, so that’s not a viable solution either.

Any other good options on the market, that aren’t the ugly OEM option? I noticed DV8 has a fold down option, but unclear if this will work in this area since it’s on a bit of a slant vs. a standard non-hidden winch.

Thanks, in advance!

Sponsored

 

[retiredarmymp]

Rough Country makes a bracket that sandwiches between the fairlead and the hook and can be easily removed by loosening the winch hook if you’re going off road

 

[Bellime]

I left my front license plate off, I didn’t/don’t like any of the options for mounting.

 

[604Bronco]

Rough Country makes a bracket that sandwiches between the fairlead and the hook and can be easily removed by loosening the winch hook if you’re going off road

Hmm, this might be the way to go. Do you happen to have a link for this?

Thanks very much.

Edit: Nevermind, I found it https://www.roughcountry.com/product/configurable/fairlead-license-plate-mount-rs138c

 

[swooshdave]

I haven't found a good solution yet. So the plate is off in the front. It's only an issue here if you park downtown Portland where there's a meter. They can give you a ticket for the plate. Fortunately I never go down there.

But I'll still look for an option.

Sponsored