Hoss 3.0/ Severe Duty Rack Boot Clamps

[andersman02]

Does anyone know the exact size of the hoss 3.0 or Severe Duty rack tie rod boot Clamps? I have a couple 2.0 rack clamps (the oem style ones) But I have a sneaking suspicion the 3.0 will need bigger clamps? I do not want to use worm style If I do not have to.

Plan on picking up and installing the severe duty rack, but will need to remove the boots and tie rods for installation, so need a couple new ones.

Sponsored

 

[PWillette]

Does anyone know the exact size of the hoss 3.0 or Severe Duty rack tie rod boot Clamps? I have a couple 2.0 rack clamps (the oem style ones) But I have a sneaking suspicion the 3.0 will need bigger clamps? I do not want to use worm style If I do not have to.

Plan on picking up and installing the severe duty rack, but will need to remove the boots and tie rods for installation, so need a couple new ones.

I do believe that the severe duty rack comes complete with tie rods and boots...OEM clamps should be included. @Ducati1098 may be able to confirm.

 

[Ducati1098]

I do believe that the severe duty rack comes complete with tie rods and boots...OEM clamps should be included. @Ducati1098 may be able to confirm.

Yes, it does
Shouldn't need to remove the tie rods for installation at all

 

[andersman02]

Yes, it does
Shouldn't need to remove the tie rods for installation at all

Everything im seeing is if you keep the fdu in place, even with loosening the fdu bracket, the tie rods need to be removed.

Not correct? Or is it fine to keep tie rods only if you drop the fdu?

Not needing the full kit, just looking for the size of oetiker clamps

 

[Ducati1098]

Everything im seeing is if you keep the fdu in place, even with loosening the fdu bracket, the tie rods need to be removed.

Not correct? Or is it fine to keep tie rods only if you drop the fdu?

Not needing the full kit, just looking for the size of oetiker clamps

Yeah they probably need to be removed if you don’t remove the FDU.

Can’t help with the clamp size unfortunately. Ford doesn’t list/sell them separately.

 

[PWillette]

Everything im seeing is if you keep the fdu in place, even with loosening the fdu bracket, the tie rods need to be removed.

Not correct? Or is it fine to keep tie rods only if you drop the fdu?

Not needing the full kit, just looking for the size of oetiker clamps

Take a look on McMaster Carr. Order up a few sizes in the approximate range, they're cheap.

Sponsored