Interior Orange Bits/Dash Swap

[Agswin]

Is there a plug and play option to replace the orange bits in the Raptor with another color, say blue or white? Im talking about the orange in the grab handles, vents etc? Also, can the dash bezel be removed and painted easily?

Sponsored

 

[Iamthedan1989]

Yea, you can easily swap the grab handles and dash with any other trim. I swapped my gray base dash with the FE Black one, with the lower trim the bronze from the OBX.

It's a 10min job!

The air vents can have any custom colors from https://www.bdusa.co/

 

[Agswin]

Yea, you can easily swap the grab handles and dash with any other trim. I swapped my gray base dash with the FE Black one, with the lower trim the bronze from the OBX.

It's a 10min job!

The air vents can have any custom colors from https://www.bdusa.co/

So you need to replace the whole grab handle or they sell just those colored inserts? Do they sell lettering for the colored "BRONCO" in the dash panel?

 

[Iamthedan1989]

The grab handles are 2 pieces, you may be able to find someone that wants to swap the interior color, but that'd be a bit difficult. They don't sell the colored insert separately, atleast on OEM part sites that I've found.

Tuffskinz has some good dash lettering inserts

 

[SenorBezi]

I'm looking for the orange ones right now to replace my blue ones. I'd be down to swap. I'll DM pictures because not sure if the trim colors would match.

 

[Agswin]

I don’t even have a bronco yet bro

 

[helifino16]

I don’t even have a bronco yet bro

When you DO get the new one, you will be happy. Howdy!

I totally get why you want to ditch the offensive accents. Kept me away from the Badlands.

 

[87 BAJA]

I have a Black First edition dash upper and lower left/right parts if anyone is looking I had a custom dash installed so no longer need. I ordered intending to install but never did. All new in Packing directly from ford.

 

[22 Spyder]

I cover most the orange pieces with Azure Gray colored parts from Tuf Skinz. I also did their outside "Raptor" inserts on my Bronco Raptor. They make quality stuff.

 

[Sparky575]

I have a Black First edition dash upper and lower left/right parts if anyone is looking I had a custom dash installed so no longer need. I ordered intending to install but never did. All new in Packing directly from ford.

Is this for the 12” screen? Do you have any pictures?

 

[87 BAJA]

Is this for the 12” screen? Do you have any pictures?

It has been sold already thank you

 

[MORaptor1]

I cover most the orange pieces with Azure Gray colored parts from Tuf Skinz. I also did their outside "Raptor" inserts on my Bronco Raptor. They make quality stuff.

all that and you leave the dealership sticker on it?

 

[22 Spyder]

all that and you leave the dealership sticker on it?

lol, it was removed right after installs

Sponsored