Is there anything to cover this up?

[rblock50]

I don’t know what to call this area on the Bronco that has 3 bolts when you take off the top. I saw lots of B-Pillar covers out there, but not sure how to find something to cover up this area. I tried searching for C-Pillar but came up empty. Anyone find or make something for it?

Sponsored

 

[Dadsquatch]

Not that I’ve seen, but you bring up a good point that it would be nice to have something here when the top is off.

 

[adcam]

The soft tops have this area covered.

 

[Area51BS]

You could cut some ABS plastic to fit and use 3M double sided tape or cut this to fit.
https://www.seadek.com/product/seadek-square/

 

[CyberOrangeBadlands]

A cover for the top of the tub rails would be nice too.

Something for a 2 door.

 

[eduard4us]

The soft tops have this area covered.

They do? I wonder if there is a part number for that piece that we can order separately.

 

[rblock50]

The soft tops have this area covered.

The soft tops are “covered”, but it’s still not flush and you still see 3 bolt holes. So they still have the same issue.

 

[Bronco1010]

Looks like appx $130 per side

 

[rblock50]

You could cut some ABS plastic to fit and use 3M double sided tape or cut this to fit.
https://www.seadek.com/product/seadek-square/

i was thinking some soft of plastic that I would spray with bed liner to get the textured look. However, your idea is better!

Maybe our friends at @Mabett can make this and add to their catalog of parts. What do you say?

 

[rblock50]

Looks like appx $130 per side

I’m thinking this is the trim that I posted earlier. It’s better, but still doesn’t 100% solve the issue in my opinion. It might also be too thick and interfere with the HT going back on?

 

[Area51BS]

i was thinking some soft of plastic that I would spray with bed liner to get the textured look. However, your idea is better!

Maybe our friends at @Mabett can make this and add to their catalog of parts. What do you say?

Few bucks on Amazon for the ABS. Score with a razor and snap off. Cut corners next. Sand edges. Polish edge with steel wool or acetone on a rag.

 

[Mabett]

i was thinking some soft of plastic that I would spray with bed liner to get the textured look. However, your idea is better!

Maybe our friends at @Mabett can make this and add to their catalog of parts. What do you say?

I will consider.

 

[adcam]

Not sure why it isn’t provided for the hardtop.

 

[rblock50]

Not sure why it isn’t provided for the hardtop.

Yeah that looks much better, I would assume it is too thick for the HT. However, I am hoping for something cleaner without the screws on it. Yeah I know, first world problems lol.

 

[helifino16]

Mabett makes Tub Rails for the 4-door:
Cargo Shelf Side Covers

Looks like IAG sells the same thing:
Rear Body Tub Rail Protector

Sponsored