- First Name
- Chris
- Joined
- Mar 18, 2022
- Threads
- 19
- Messages
- 407
- Reaction score
- 802
- Location
- Hemet, CA
- Website
- lobooffroad.com
- Vehicle(s)
- All of them
- Your Bronco Model
- Wildtrak
- Thread starter
- #1
Relocate your Bronco’s license plate to a safer spot on the tailgate where it can’t get smashed or torn off by rocks and obstacles!
Relocating the license plate is required for most aftermarket rear bumpers including the Lobo Off-Road HNT Rear Bumper. The Lobo license plate mount allows for adjustment of the position of the license plate in relation to the spare tire. Tuck it in for use with smaller spare tires so it doesn’t extend past the edge of the tailgate as much when opened. Or adjustt it further outward to accommodate larger spare tires without them obscuring the view of the plate.
The base plate of the Lobo license plate mount installs in place of the oval Ford emblem (which must be removed) below the tailgate handle. Wiring is completely concealed as it passes through an existing hole in the tailgate (located under the removed emblem).
The Lobo license plate mount comes with an integrated LED license plate light, hardware, and supplies to cleanly re-route your license plate light wiring.
The Lobo Off-Road Rear License Plate Mount goes perfect with our HNT Rear Bumper or any aftermarket high clearance rear bumper! Check it out on the Lobo Off-Road website for more info or to place your order.
Relocating the license plate is required for most aftermarket rear bumpers including the Lobo Off-Road HNT Rear Bumper. The Lobo license plate mount allows for adjustment of the position of the license plate in relation to the spare tire. Tuck it in for use with smaller spare tires so it doesn’t extend past the edge of the tailgate as much when opened. Or adjustt it further outward to accommodate larger spare tires without them obscuring the view of the plate.
The base plate of the Lobo license plate mount installs in place of the oval Ford emblem (which must be removed) below the tailgate handle. Wiring is completely concealed as it passes through an existing hole in the tailgate (located under the removed emblem).
The Lobo license plate mount comes with an integrated LED license plate light, hardware, and supplies to cleanly re-route your license plate light wiring.
The Lobo Off-Road Rear License Plate Mount goes perfect with our HNT Rear Bumper or any aftermarket high clearance rear bumper! Check it out on the Lobo Off-Road website for more info or to place your order.
Sponsored