M&R Automotive MODULAR BUMPER FOG OPENING LIGHT KIT

[timstrong20]

Got them installed yesterday, took about an hour and a half. Was pretty simple although I did have an issue crimping the aux wires. They kept slipping out. Probably operator error. I wound up just shoving the wires in the connector and heat shrinking the plastic around it. Anyway here are some pictures. I love the ambers as a nice accent lighting. The whites are extremely bright! Definitely off road only. All in all I really like them, but for people looking for a true fog light these probably aren't for you. The whites are too powerful and the ambers are not powerful enough.

I also included a bonus photo of the aux switch labels I installed from stickerfab.

Would you mind taking some night pics with both the amber and the white please. They look real good mounted in there.

Sponsored

 

[Squatchn']

Would you mind taking some night pics with both the amber and the white please. They look real good mounted in there.

I'll see if I can get some good night time photos, but my camera phone isn't very good in the dark. Also check through this thread, I believe there are some night time shots that other people posted.

 

[MandRautomotive]

I'm trying to come up with a solution to wire the amber lights to a factory fog switch and just put the white lights on an Aux switch. There's a huge thread on the subject (https://www.bronco6g.com/forum/threads/factory-fog-light-switch.22937/), but my Badlands mid package doesn't have the pre-existing fog light wiring. So there's another thread about tapping into the side marker lights (https://www.bronco6g.com/forum/thre...gnal-for-relays-or-lights.33454/#post-1139366). The ambers would run as DRL and I'd keep the whites on an Aux switch.

My question is, what happens to these lights if both the Amber and White lights are powered up simultaneously?

The LEDs are independent so if you turn on amber DRL and then white, the white light will wash out the amber and it will just shine white.

 

[mybikeisred]

Got them installed yesterday, took about an hour and a half. Was pretty simple although I did have an issue crimping the aux wires. They kept slipping out. Probably operator error. I wound up just shoving the wires in the connector and heat shrinking the plastic around it. Anyway here are some pictures. I love the ambers as a nice accent lighting. The whites are extremely bright! Definitely off road only. All in all I really like them, but for people looking for a true fog light these probably aren't for you. The whites are too powerful and the ambers are not powerful enough.

I also included a bonus photo of the aux switch labels I installed from stickerfab.

I just folded the wires over before I crimped it. Made it twice as thick. Nice and tight.

 

[Alvin Olson]

Completed my install this weekend.
Thank you to @MandRautomotive for the support.
The online videos were very helpful.
It took some patience but everything needed was included.

Bumper Lights during the day (Off Road Only)
Wired to SW5

Amber Lights only - Good for DRL as they are not over powering
Wired to SW6

Amber at Dusk - gives it a very good look

Headlights plus White Bumper Lights at Dusk/Night

Headlights Only Output at night

Headlights plus White Bumper Lights at night.
- ya pretty bright and for off road use only. My neighbors hate me now.

 

[MandRautomotive]

Completed my install this weekend.
Thank you to @MandRautomotive for the support.
The online videos were very helpful.
It took some patience but everything needed was included.

Bumper Lights during the day (Off Road Only)
Wired to SW5

Amber Lights only - Good for DRL as they are not over powering
Wired to SW6

Amber at Dusk - gives it a very good look

Headlights plus White Bumper Lights at Dusk/Night

Headlights Only Output at night

Headlights plus White Bumper Lights at night.
- ya pretty bright and for off road use only. My neighbors hate me now.

Love the post. Thanks for your effort. Its hard capturing output shots. You did a great job. Glad you love them

 

[tm0708]

Does it come with the left and right side? Or do they have to be purchased separately?

 

[Alvin Olson]

Does it come with the left and right side? Or do they have to be purchased separately?

It is both sides. Left and Right.
The kit included 2 bezels, 8 Dual Color LED lights, mounting hardware for the lights into the bezel and I added the Aux Wiring kit to it.
You will need some tools to complete the install, but nothing outside the norm.

 

[tm0708]

It is both sides. Left and Right.
The kit included 2 bezels, 8 Dual Color LED lights, mounting hardware for the lights into the bezel and I added the Aux Wiring kit to it.
You will need some tools to complete the install, but nothing outside the norm.

Great. Thank you so much.

 

[MandRautomotive]

Look at that color of the Bronco. The M&R bumper light Kit looks factory.

 

[Due51]

That's a great looking rig.

 

[TheKim]

Any chance for a video on completing the wiring to AUX 1 and AUX 2? Would love that. Also, are these water proof, and safe for car washes? I regular a touchless car wash.

 

[Due51]

Any chance for a video on completing the wiring to AUX 1 and AUX 2? Would love that. Also, are these water proof, and safe for car washes? I regular a touchless car wash.

I didn't video my install, but if I was able to do it, anyone can lol. I used the supplied harness and ran the passenger side wires behind the bumper (I took the trim that surrounds the tow hooks off to help fish the wires through to the driver's side). Then I fed a flexible stick (my ORV flag staff) down between the battery box and headlight assembly. Taped the harness to the staff and pulled it up. I put the wires on a sheath, zip tied that to the hood latch cable, then used butt connectors to hook the white lights to Aux 2 (15amp) and the amber to Aux 6 (10amp). I grounded each set to a nearby bumper bolt.

*You don't need to use Aux 1 (30amp) for the white light hookup. Save it for something like a winch or some other Big draw accessory.

** I suggest adding a waterproof 2-wire connector somewhere near the driver side light so if you ever want to remove your bumper, you can lol.

 

[MandRautomotive]

That cyber orange really pops

 

[Alvin Olson]

That cyber orange really pops

Thanks.. it is a really good color. No ragerts....

Sponsored