Mabtte Door Sill Protector for Ford Bronco 4-door 2021+

[Mabett]

• Made of high quality ABS and stainless steel
• Prevent slipping when you get in the car
• Decorative sill protectors cover existing scratches
• Prevent your door panels from abrasion and scratching the original car paint.

Buy “Door Sill Protector” directly for $35.99 via this link: https://www.amazon.com/gp/mpc/A22V3JW7NCL8SU

• Note: Please return to this page to redeem the discount after the promotion starts on 2022-4-30 08:00 PDT
• Note: Please operate when “Door Sill Protector” is available

Product Description

• Fits Ford Bronco 2021 2022 4 Door. Contains 2pcs Front Door Sill Guards and 2pcs Rear Door Sill Guards.(Not fits bronco sport and 2-door bronco)
• Car Door Sill Protector for Bronco adds friction to the sole. In the case of wet soles, these protectors prevent slipping when you get in the car.
• Door Sill Protector for Ford Bronco covers frequently trodden areas. Can be used as a Door Entry Guard Scratch Shield to protect stomping areas where the threshold would get scratched or discolored.
• Our Door Sill Guard for Ford Bronco is made of high quality ABS and stainless steel, which adds to the beauty of the car.
• Before installing Ford Bronco Door Edge Guards, make sure the threshold area is free of dust stains. *Do not let it get wet or move it for 24 hours after installation.

Sponsored

 

[Mabett]

It is recommended to apply adhesion promoter during installation
Customs can't pass my adhesion promoter, it's not that I don't want to give it to you guys

For Example:

 

[Dmorty217]

When are these available? Says April 30 after 8am which it is eastern time but it’s not available to purchase. Never mind I see 8am PDT

 

[Panmort]

Ordered but honestly not a fan of the 1966. Likely will cover it up using plasti-dip or something.

 

[mtrombet]

• Made of high quality ABS and stainless steel
• Prevent slipping when you get in the car
• Decorative sill protectors cover existing scratches
• Prevent your door panels from abrasion and scratching the original car paint.

Buy “Door Sill Protector” directly for $35.99 via this link: https://www.amazon.com/gp/mpc/A22V3JW7NCL8SU

• Note: Please return to this page to redeem the discount after the promotion starts on 2022-4-30 08:00 PDT
• Note: Please operate when “Door Sill Protector” is available

Product Description

• Fits Ford Bronco 2021 2022 4 Door. Contains 2pcs Front Door Sill Guards and 2pcs Rear Door Sill Guards.(Not fits bronco sport and 2-door bronco)
• Car Door Sill Protector for Bronco adds friction to the sole. In the case of wet soles, these protectors prevent slipping when you get in the car.
• Door Sill Protector for Ford Bronco covers frequently trodden areas. Can be used as a Door Entry Guard Scratch Shield to protect stomping areas where the threshold would get scratched or discolored.
• Our Door Sill Guard for Ford Bronco is made of high quality ABS and stainless steel, which adds to the beauty of the car.
• Before installing Ford Bronco Door Edge Guards, make sure the threshold area is free of dust stains. *Do not let it get wet or move it for 24 hours after installation.

When will these be available for 2 Doors?

 

[bman3000]

Im a fan! Cant seem to access discount.

 

[bman3000]

Figured it out and ordered placed. This was an item I requested when you were looking for ideas. Im glad I held off purchasing another option, these look great!

 

[Mabett]

When will these be available for 2 Doors?

soon

i am preparing

 

[Ground_zero298]

Ordered mine on amazon 2 weeks ago. I Know there was a short lead time.

 

[Snappy22]

Ordered mine on amazon 2 weeks ago. I Know there was a short lead time.

Did you install with adhesion promoter? I’ve never used the stuff so wondering if necessary?

 

[BWepps]

These are nice @Mabett, but they look kind of thick. Do these impede the doors closing easily or deform the doors rubber strips?

 

[Mabett]

These are nice @Mabett, but they look kind of thick. Do these impede the doors closing easily or deform the doors rubber strips?

This doesn't happen in my tests

 

[Ground_zero298]

Did you install with adhesion promoter? I’ve never used the stuff so wondering if necessary?

Haven’t got them yet. Will just be using some 91 alcohol and a couple dots of 3m caulk.

 

[Panmort]

These are nice @Mabett, but they look kind of thick. Do these impede the doors closing easily or deform the doors rubber strips?

I ended up not installing them after putting one of the front and rear ones on. When opening the door it made a more pronounced pop when opening the door, making it seem like the sill protector is putting more pressure on the bottom of the door while it's closed.

 

[BWepps]

I ended up not installing them after putting one of the front and rear ones on. When opening the door it made a more pronounced pop when opening the door, making it seem like the sill protector is putting more pressure on the bottom of the door while it's closed.

Unfortunate, but that is valuable feedback. Thanks for sharing.

Sponsored