ModCrate Spring Pricing Update

[Russ.Cere]

Quick and simple update. I have reduced the base pricing for hard top latch bushings by 25%. The 15% off B6G and club specific discounts still apply however all standing 50% off discounts have been discontinued. If you are having a club event or group trail ride larger discounts will be made on request.

Check out the store here!
Bronco Mods by ModCrate

B6G - "15B6G" 15% off for B6G forum members
Indiana Broncos "IB15%" 15% off for Indiana Broncos FB Group members
Michigan Broncos Club "MBC15" 15% off for Michigan Broncos Club members

Sponsored

 

[Boreal]

@Russ.Cere

Can you elaborate on the Latch Plate, why the two door only accepts a single plate on the driverside? What’s the deal with the passenger side?

And which green, Lime or Dark, represents Eruption Green the closest?

 

[Russ.Cere]

@Russ.Cere

Can you elaborate on the Latch Plate, why the two door only accepts a single plate on the driverside? What’s the deal with the passenger side?

And which green, Lime or Dark, represents Eruption Green the closest?

The early production hardtops were a bit all over the place. I found a lot of the two doors had a cylindrical protrusion under the passenger side OEM latch plate. It created a bit more confusion than I could handle. If you look under your stock latch plates and both are flat you're good for a modification free installation.

Unfortunately neither is a good color match save for the Hyper Blue, Badlands Orange and, Red they are more contrast accents.

P.S if you're thinking about purchasing hold off for a few days I am lowering the price on the latch plates as well.

 

[ToddReynolds]

@Russ.Cere

Can you elaborate on the Latch Plate, why the two door only accepts a single plate on the driverside? What’s the deal with the passenger side?

And which green, Lime or Dark, represents Eruption Green the closest?

I have a 2 door and ran into this issue. I ended up just using a Dremel and cutting that little nipple off. As soon as it was removed everything installed with no additional issues.

 

[ironmike]

@Russ.Cere , any chance you’ll do another run of both latch plates and bushings in Code Orange?

 

[Russ.Cere]

@Russ.Cere , any chance you’ll do another run of both latch plates and bushings in Code Orange?

It's unlikely. That color ended up being a nightmare to have anodized. I can facilitate some raw parts getting a Code orange color match in an automotive paint if you're interested in that.

 

[ironmike]

It's unlikely. That color ended up being a nightmare to have anodized. I can facilitate some raw parts getting a Code orange color match in an automotive paint if you're interested in that.

Sure thing…I’ll DM you about it.

 

[Footer]

Russ,

DM'd you last week.......

 

[Russ.Cere]

Spring Pricing is live.

Hardpoint Latch Plates now come in a (2) pack for the same price. $45 for two Latch Plates.

Sponsored