Can someone show these installed please. I am confused about where these go.
thanks
Can someone show these installed please. I am confused about where these go.
thanks
Sponsored
Can someone show these installed please. I am confused about where these go.
thanks
Can someone show these installed please. I am confused about where these go.
thanks
Yes, the hardtop still functions as normal...off/on.And you can still put your roof on with this thing on, or u have to remove it to put your roof on?
https://performanceparts.ford.com/download/instructionsheets/IS_M-20201-CBBK_041923.PDFAnyone have any tips or tricks on removing the C Pillar moulding? Seems like you have to at least remove some additional moulding prior to removing the c pillar cross bar moulding....
I could be interested! Just need to determine if it works with my AAL cargo shelf first.Moredoor 2022+ only unless you want to get crafty and drill, threadsert, etc. I bought the rear only roll bar brace kit thinking it would work on two door but the roll bar angle is different and the roll bar would need to be drilled/threaded. I’m in Denver Colorado and would sell for $400 if there’s someone local or coming through that’s interested. To ship it would be a pretty penny as the box needed to ship is huge but not particularly heavy. Let me know, thanks.
I’d be happy to mock it up with you. If the shelf uses any of the three threaded holes below the speaker housings on the downward rearmost roll bar tubes then probably not…I could be interested! Just need to determine if it works with my AAL cargo shelf first.
Looks like AAL has a version for BRaptor which comes with the same brace from the factory so if you’re really wanting the brace you might be able to get BRaptor brackets from AAL.I could be interested! Just need to determine if it works with my AAL cargo shelf first.
Thanks, read that. Looks like more than that piece may need to come out as it has 2 tabs that fit into the adjoining pieces
I'm definitely interested. I live down in Colorado Springs, was planning to drive up there soon to go to Microcenter. Got all the hardware from the kit?Moredoor 2022+ only unless you want to get crafty and drill, threadsert, etc. I bought the rear only roll bar brace kit thinking it would work on two door but the roll bar angle is different and the roll bar would need to be drilled/threaded. I’m in Denver Colorado and would sell for $400 if there’s someone local or coming through that’s interested. To ship it would be a pretty penny as the box needed to ship is huge but not particularly heavy. Let me know, thanks.
I need more of this in my life? More pics and specs!My 42 dodge flexed so much the tailgate would open on big bumps
and no it wasn’t work out bushings
it wasn’t designed to do 75 either
moving the flex makes other issues too