classy! Really like this combination.Just put the KMC Summit wheels on my SAS badlands. Still running the GY MTs until they die. Then probably upgrade to some Nitto RGs. Picked the +18mm offset so just a bit more poke than the SAS wheels but not noticable
before and after.
And yes the “gray tint” is more visible in the box and in certain light.
Thanks! SAS wheels weren’t bad but with a few more Broncos around town it was time.
This Bronco is my all time personal favorite so far!!! I'm in love...Thanks. Our Bronco is a Wildtrak with the sasquatch package. We did not install a lift kit and the wheels have a +1mm offset. Here are a few more photos.
Damn, I'm sorry to hear that. I've got some 285/75/17's ready for when the bronco gets here. So there was no rub before you put the Bilstein's on and now there is. That is odd, right?Hate to be the barer of bad news. Went to go reinstall my skid plates this morning and when making a sharp turn on a somewhat down hill driveway into my garage - I heard the dreadful rub. Turns out - 285/75 on steelies are going to need some spacers…at full tilt, they’re hitting the swaybar. Ugh.
I don’t think it had anything to do with the Bilsteins. I’ve got some more tests to run. I need to make sure the sway bar is centered. Though, some said it’s not adjustable. I’m sure the tires will fit fine and something is just misaligned. It’s on extreame tilt pulling right - but, not left. So, I think I jumped to conclusions with my post.
Ok, got it. I'll be following here to see if you find a solution.
And I have to give a shout out for the team @Discount Tire. Supply chain backups have made this a long process but they were super professional, did a quick job on swapping out the wheels and had me in and out in less than an hour. Will definitely be back in when I get my new Nittos!Just put the KMC Summit wheels on my SAS badlands. Still running the GY MTs until they die. Then probably upgrade to some Nitto RGs. Picked the +18mm offset so just a bit more poke than the SAS wheels but not noticable
before and after.
And yes the “gray tint” is more visible in the box and in certain light.
I'm biased, I have those wheels but run Toyo AT'sNot mine but I was at my dealer today making sure the Wildpeak 35's, lift kit, and pod lights were ordered for the arrival of my OBX next week and this one had just gotten back from their customization shop for a customer pick up later today. I think it needs a leveling kit but I like what they've done.
Looks great. Be weary of the stock tires as I've read countless complaints of throwing rocks/stuff all over side of Bronco. Add mudflaps at minimum.New wheels, stock tires... Saw several reviews on Youtube for these Rock Trix wheels and everyone said good things. Good quality feel and look so I decided to give the RT110s a try! Time will tell. They are an inch more aggressive than stock and it makes the stance perfect in my opinion. Now I just need to get my leveling kit installed...
