- First Name
- redneck
- Joined
- Jan 3, 2020
- Threads
- 21
- Messages
- 4,379
- Reaction score
- 12,419
- Location
- Central PA
- Vehicle(s)
- 88 5.0 LX, 08 F-150 Stepside, 22 Expl Timberline
- Your Bronco Model
- Base
- Thread starter
- #91
Lost some more bits tonight>>>>>>>>>>>>>>
I believe this is the shot you were looking for @Aztec1382
One with a tape measure, if it helps. The end of the tape is on the pipe. The front of that pad is 2 3/8 off the pipe.
Some shots of the "bits" missing. And the clearance I have now.
I hade to see if it was any better now with the bumper on.
In this pic I got the winch plate up to the bottom of the bumpers "pocket".
Still tucked in nice.
You really have to lean to start to see the winch.
Messed around some more and managed to get the plate up to damn near the bottom of the frame and still not hit underside of the top of the bumper. I was losing light and had to go pick up my son from soccer practice. Hence the flash on the second. You can also see it is not as high up as it is on the opposite side. The surface I am working off of is not level. When I get it in the garage to finalize the template it will be better.
I'll be making some frame bracket templates starting tomorrow so stay tuned. If ya'll need anymore shots let me know.
I believe this is the shot you were looking for @Aztec1382
One with a tape measure, if it helps. The end of the tape is on the pipe. The front of that pad is 2 3/8 off the pipe.
Some shots of the "bits" missing. And the clearance I have now.
I hade to see if it was any better now with the bumper on.
In this pic I got the winch plate up to the bottom of the bumpers "pocket".
Still tucked in nice.
You really have to lean to start to see the winch.
Messed around some more and managed to get the plate up to damn near the bottom of the frame and still not hit underside of the top of the bumper. I was losing light and had to go pick up my son from soccer practice. Hence the flash on the second. You can also see it is not as high up as it is on the opposite side. The surface I am working off of is not level. When I get it in the garage to finalize the template it will be better.
I'll be making some frame bracket templates starting tomorrow so stay tuned. If ya'll need anymore shots let me know.
Sponsored
Last edited: